EQ/Crossover question

[Ronaldo95163]

hi I have a Boss CX1000 2000W Max 4-Channel Chaos Exxtreme Series Amplifier (CX-1000) feeding four Rockford Fosgate T16 speakers in channel 1&2 3&4 bridged to a Rockford Fosgate P1-1X12. Signal supplied from a Sony dsx-s200 headunit. Can i install a
Clarion EQS746 into this system if so please give instructions thanks.

[ruffneck_12]

ye boieeee, Deck>crossover/EQ>amp

but send the high pass to channel 1/2
and the low pass to 3/4

[southside connections]

^^, check back the configuration there

if he as a preamplifer, he would use a front out from the deck to the front in of the preamp, then he can use a crossover, or the built in crossovers on the amp

He may not need the preamp, if the head unit has a built in eq and crossover

[exia_sir]

Deck into "Main in" on the EQ then front OR rear out into channels 1&2 of the amp. Sub out into channels 3&4 of the amp.