Help me get this sylphy door panel off

[azeem]

took out the window control so far. i dont wanna break anything.
if anyone knows how to get the door panel off, the help would be appreciated

[nervewrecker]

which model pal?

[azeem]

have no idea

2006 japan?

[azeem]

[azeem]

[nervewrecker]

Is there one near the top front corner above the door hinge?

See if there is one near the back by where closes in and check underneath.

Basically, check right around and I donno if there are any under the handles.

wrap a medium sized flat head screwdriver, wrap it in soft cloth and slide it in between the upholstery and door. Pry towards you, as it maybe never come off it gonna be hard.

[azeem]

ting have no screw holes anywhere, nor them little caps to cover screws nuttin. i'll try the screw driver wrapped in cloth tomm.

[nervewrecker]

Is there a part underneath to slip your hand into? slip it in and pull

[azeem]

2 grooves
but it really firm.

could the door panel be held by those 2 screws that i removed alone?

[wagonrunner]

those and a whole lot of clips, around the edge of the panel where it meets metal.
I would put both hands in the groove where it meets metal at the bottom of the upholstery, and gently tug repeatedly, increasing force gradually. It will separate.

[blacklancer]

those and a whole lot of clips, around the edge of the panel where it meets metal.
I would put both hands in the groove where it meets metal at the bottom of the upholstery, and gently tug repeatedly, increasing force gradually. It will separate.

This is exactly how its done feels as if wont come off but a good pull with moderate force will do it.

[azeem]

thanks alot fellas, it came off. lots of force required. i made a video to put on youtube, mite help some ppl.