Help how to wire 2 batts,cap,fuse block? help?

[Rahtid]

one stinger spv35 in engine room,one spv70 in trunk with a cap,then to fuse block then to amps rite?


lemme know the real scene please?

or if anyone close to trincity side wanna install,,,no scene,,,

[riadb]

lil wonder

amm nope

any big 2 channel
i always recommend the crossfire XP7202 for a pair of 18sound 8's

[Rahtid]

what about the 720.4 or 960.4? or shud i use a next 880.2 ?

[-bushman-]

powerbass 800.2


Rahtid, you put in a next battrey yet? if im not mistaken you had a post in the tech forum bout lack of power where you said you had one small battrey...

[riadb]

use the 880.2 powerbass

the 960.4 tarantula is rhelllllll sheit

[Rahtid]

i buyin the stinger 7sumtin,cuz i have the stinger 35 now

800.2 2 channel
SPECIFICATIONS:

• 4 ohm Power : 200W x 2
• 2 ohm Power : 400W x 2
• 4 ohm Mono Power : 800W x 1


so then i wud be sending 800w to the 8s if i run the amp mono?

and then the 880.2 that i have,run it in mono for the two tens?

[riadb]

yea
exactly

run both amps mono @ 4 ohms

[-bushman-]

2 8" & 2 10" dj speakers

how is your hearing?

[Rahtid]

it good,,,

[riadb]

SPV35 and SPV70??

[-bushman-]

i see you looking for a bass amp too, jus to make sure, enlighten us about your power supply.
how much battries you hav & what amps/hour?

it makes no sense you puttin in all that music & you dont hav the power requirements for it. low voltage = spoiled amp

[Rahtid]

power is not a problem,,i have that under lock

[-bushman-]

ok kool, well the atomic 3000d is an option, there are some mmats amps as well that may meet your requirement & if im not mistaken there might be a sundown amp as well.

btw, what is the coil configuration on the sub?

[- Rovin's car audio -]

so besides 8s & 10s u gonna be using tweeters\drivers too in this set ? ....

[Rahtid]

,shud i use a pair of drivers also?

processor-mpq7


yeh rovin,,but drivers will come in later tho,

[- Rovin's car audio -]

for all that ole noise i def wud rec a pair of drivers



u can save urself some $ & just do a simple 2 10s & 2 drivers combo in d back dash like how casper have his ...

[casper]

i think u should get a good powerful 4 channel if u are considering to eventually add drivers to ur system....u can bridge two channels on the 4 channel and save the other 2 for the drivers when u get them rather than having to buy ANOTHER amp to play the drivers which gonna drain ur current even more...

it will be more feasable too...

[Rahtid]

i think u should get a good powerful 4 channel if u are considering to eventually add drivers to ur system....u can bridge two channels on the 4 channel and save the other 2 for the drivers when u get them rather than having to buy ANOTHER amp to play the drivers which gonna drain ur current even more...

it will be more feasable too...

one problem casper,i eh know which powerful 4 channel to buy jed.

[Pirate]

d 4 channel amp sounding like the way to go...unless u have real room and like using alot of current...

[Rahtid]

and what about the bass amp?

whats a good bass amp with a high dampening factor?

[casper]

a soundstream PCA2000d will sound good with that sub

heard that combo already and its really impressive

[Rahtid]

^^ok but tha dampening factor low,,,any disadvantages?

[casper]

iz a d class mono...the dampin WILL be relatively low

[Rahtid]

will the 1500d picasso work just as well? i know its about 500 watts less,but would that be much considering the fact that its a little more in terms of rms(enuff power will be supplied,14.4v) so more like maybe 1800 watts from the pca1500d?

[casper]

^^^no...the PCA1500d is already rated at 14.4v so u will actually get less than that when ur voltage drops...

if ur voltage dips to 12.5v for example with that amp then u will get around 1302rms

and this depends on if u truly getting 1500rms from the amp at 14.4v as stated...

the 2000 picasso u should get around 1708rms @ 12.3 (considering the extra .2v draw from the extra 500rms)

as i told u ...the power acoustic 3000d has the same board as the PCA 2000d so u can save u some money and go get that...same recommended external fuse of 180amps as well so i assume that most components in the both amps are basically the same

[- Rovin's car audio -]

u cud use d 3000 PA & save about $800-1000 if u buy it new - same effect ...

[Rahtid]

i buyin the atomic 1600.1

[- Rovin's car audio -]

i always advise buying a amp a slightly higher than what d sub rated power is so if its a 800wrms sub i wud advise a 1000wrms sub so that there is headroom on d amp & d amp wont have to be 'working max' ...

[Rahtid]

rovin jeddd,,,,if i had some time i wudda been down by u to do my install,,but time is a problem,,