anybody using the static cling reusable tint yet?

[Wolf]

so what is the verdict of the static cling reusable tint?
anybody using the static cling tint yet. how it holding up to we weather?
stays on all the tiime or problems with it falling off at times specially when winding up glass? lemme know what aulluh think that is who using it, since POPO stressing over the 20% this might be the way to go if it holding up good.

[Aaron 2NR]

i have it and no problems.....just like regular tint

[equipped2ripp]

i using it on my own vehicle since i got it... standing up very well and it's not falling off. no signs of it peeling or anything.

i applied it just as regular tint with a soapy solution and used a spreader, so it's stuck on to the glass.. no bubbles or air pockets.

when i want to remove it, i will just peel it off and use it back whenever.





as you can see, it looks like normal tint.



i'm going to put it on my other vehicle this week, since i took off the 2.5% and put on 35%

[~Vēġó~]

^^^hows the view from outside in? like what G5 or what?

[equipped2ripp]

yup... black like G5.

[honda hoe]

static tint? wtf

[cacasplat3]

^^^^honda boys slow as usual

[honda hoe]

cacasplat3, i rox it jdm yo.. no tint

[Midnight_Demon]

^ bess way to go

[Greypatch]

how easy is it to come off ?

[equipped2ripp]

just peel it off... no sticky residue or anything.

and just re-apply it again as you first did.

[honda hoe]

[Zeriam]

nice nice

[jason12]

WHERE CAN I GET THIS 2 BUY

[equipped2ripp]

$360.00 per roll


620-9674

[jason12]

ok thanks

[hottstuff]

i using it on my own vehicle since i got it... standing up very well and it's not falling off. no signs of it peeling or anything.

i applied it just as regular tint with a soapy solution and used a spreader, so it's stuck on to the glass.. no bubbles or air pockets.

when i want to remove it, i will just peel it off and use it back whenever.





as you can see, it looks like normal tint.





i'm going to put it on my other vehicle this week, since i took off the 2.5% and put on 35%

Two thing...
1)I see you say you used it with soap solution but I read that it is advisable to use it as is on glass....have you ever tried removing it to see how it looks re-applied?

2)I had 15% titanium below G5 and get strip on Valencia juction...thank the lord...no ticket..But I want same effect or similar.How is that possible with the static cling?Or can I put a 50% titanium and use the 35% or darker static cling on top that.

[equipped2ripp]

^ the soap solution is needed to have a smooth bubble-less finish, so that the glass can move freely.

you could use the 50% titanium and put the static cling on top that.

[Jon_One]

Where can i get this?