Page 1 of 1
QG 15 silver top had and block conversion
Posted: April 23rd, 2016, 8:52 am
by trinikl
i just changed my QG 15 blacktop and used the QG 15 silver top (head and block only) but my car is saying that the cam position sensor and the cam shaft postion sensor is faulty can someone please help me to fix it
Re: RE: QG 15 silver top had and block conversion
Posted: April 23rd, 2016, 9:13 am
by racedriverpro
trinikl wrote:i just changed my QG 15 blacktop and used the QG 15 silver top (head and block only) but my car is saying that the cam position sensor and the cam shaft postion sensor is faulty can someone please help me to fix it
Both sensors are simple to replace. Crank is in a kinda hard to get into area..u might have to access it from underneath the car. AFAIK the silver top is e throttle and blacktop is cable. Wiring harness would be different for both. So therein can be ur problem.
Re: QG 15 silver top had and block conversion
Posted: April 23rd, 2016, 10:25 am
by trini iceman
Both sensors bad at the same time? Either you are really unlucky or the codes are false at least one is