Page 1 of 1
would sr20vet work inplace sr20det
Posted: June 12th, 2014, 8:05 pm
by sperm count
hey guy i have '99 B14 with SR20DET with manual box front wheel drive and i just blew my engine but i was just offered SR20vet would this engine work in place of the det?
Would det computer work if i use the vet engine?
would gearbox work with the vet?
Re: would sr20vet work inplace sr20det
Posted: June 13th, 2014, 8:28 am
by Stixer7
yes
no
yes
Re: would sr20vet work inplace sr20det
Posted: June 13th, 2014, 8:31 am
by skylinechild
sperm count wrote:hey guy i have '99 B14 with SR20DET with manual box front wheel drive and i just blew my engine but i was just offered SR20vet would this engine work in place of the det?
Would det computer work if i use the vet engine?
would gearbox work with the vet?
VET can work once you get the correct mounts and such.
different engine = different computer - you will need the ECU- plus wiring harness for the engine.
gearbox - I cannot say it may be different -other tuners will need to clarify for you
easier solution- fix the blown SR20DET.
Re: would sr20vet work inplace sr20det
Posted: June 13th, 2014, 4:57 pm
by Stixer7
your option could be:
replace the block/head&block + labour + oils
put in the vet is like going from ga to sr as you will need to wire over - even if its only 2 wires the electrician is charging you upwards of 1000 not sure about the engine mounts
put in a vvl & use your turbo setup + aem piggy back 5000+0+7000 with tune and dyno
go back ga16/ga15
go vq35 as their are full swap kits for the mounts / harness etc fitting into the b4 chassis google/youtube
http://www.youtube.com/watch?v=KndFAdZjVd0I would personally put in a k24
Re: would sr20vet work inplace sr20det
Posted: June 13th, 2014, 5:53 pm
by Ted_v2
The mounts are the same if I can recall correctly.
Gearbox will work.
Wiring won't be much work.
Go vet. Totally different beast from the det
Re: would sr20vet work inplace sr20det
Posted: June 13th, 2014, 8:05 pm
by sperm count
Using the VET is more than I thought.......
Does anyone know where I can buy DET out of N14 or W11 in Trinidad?
Re: would sr20vet work inplace sr20det
Posted: June 14th, 2014, 4:34 am
by Ted_v2
The bamboo. Number 2.
Expect to pay 8-9 k for a engine complete
Re: would sr20vet work inplace sr20det
Posted: June 14th, 2014, 8:09 am
by sperm count
Thanks guys!
Bamboo it is!!!!!!
Re: would sr20vet work inplace sr20det
Posted: June 14th, 2014, 8:11 am
by sperm count
I want to use bigger brakes all round what's my best options?
Re: would sr20vet work inplace sr20det
Posted: June 14th, 2014, 9:57 am
by Ted_v2
you could go with brakes from P11 with the sr20ve
i think its 11" or go 300zx 4 piston front.
Re: would sr20vet work inplace sr20det
Posted: June 14th, 2014, 11:42 am
by sperm count
So the P11 would work on the B14 and what would work for the rear?
Re: would sr20vet work inplace sr20det
Posted: June 14th, 2014, 4:00 pm
by skylinechild
sperm count wrote:So the P11 would work on the B14 and what would work for the rear?
b14 rear wheel disc brake assembly...

price is around $1200 or so. get steel braided brake lines one time.

Re: would sr20vet work inplace sr20det
Posted: June 15th, 2014, 11:36 am
by sperm count
I already have on the rear disk brakes on B14 just wanted to use something bigger to stop the beast.
So i will buy P11 front but what for rear would work back?
Re: would sr20vet work inplace sr20det
Posted: June 15th, 2014, 2:43 pm
by Kronik
Did you get a replacement det engine?
Re: would sr20vet work inplace sr20det
Posted: June 15th, 2014, 8:08 pm
by yakuza
sperm count wrote:hey guy i have '99 B14 with SR20DET with manual box front wheel drive and i just blew my engine but i was just offered SR20vet would this engine work in place of the det?
YES
Would det computer work if i use the vet engine?
NO VET uses CoP and CAS and is Ethrottle
would gearbox work with the vet?
YES All FWD and 4WD SR's bolt up the same.
Re: would sr20vet work inplace sr20det
Posted: June 16th, 2014, 4:25 am
by Ted_v2
Really?
I was checking out if anyone ever did a sr20ve 4wd and from my research it couldn't work.
Any truth to this?
Re: would sr20vet work inplace sr20det
Posted: June 16th, 2014, 6:04 am
by yakuza
My answer was specific to the OP's question.
To be clear, any FWD gearbox/tranny will bolt up to any FWD/4WD SR engine and not the other way around.
Re: would sr20vet work inplace sr20det
Posted: June 16th, 2014, 8:58 pm
by sperm count
i am ordering the engine tmr. i will be doing a brake upgrade from other nissan calipers but once i find which works with stock B14 hubs will post info
Re: would sr20vet work inplace sr20det
Posted: June 16th, 2014, 9:03 pm
by sperm count
im ordering engine tmr i going back DET
I am doing a brake upgrade with the stock B14 hubs once i find what works i will post info!