trinituner.com

Hi,
Im looking to upgrade a Nissan B12 rear brake drums to rear disc brakes, can anyone here tell me all what i need to this conversion and where can i sauce these parts plz thank you....

i cant believe there is no response on here to my question wow....

you'll need the rear disc brake spindles complete with rotors and calipers. For the handbrakes to work, you probably want to get the hand brake cables with the pair of calipers. The rear disc brake spindles will bolt in from where you old set up was removed.

black start wrote:you'll need the rear disc brake spindles complete with rotors and calipers. For the handbrakes to work, you probably want to get the hand brake cables with the pair of calipers. The rear disc brake spindles will bolt in from where you old set up was removed.

but what vehicle do i get these disc brake spindle, calipers and rotors etc from.???

from a nissan sentra/sunny b12 or a pulsar n13. Both of these had versions that came with the rear disc brake setup. I've personally seen the b13 rear disc brake setup on a b12 but it required some fabrication work for it to be installed in the car.

Those are the only two (b12/n13) that will work bolt for bolt. Everything else will require some fabrication work.

OP a someone on tuner has a b12 rear disc brake assembly for sale...tuner name was marlon5 or marlo or something so....check the car parts section...bound to find him.

skylinechild wrote:OP a someone on tuner has a b12 rear disc brake assembly for sale...tuner name was marlon5 or marlo or something so....check the car parts section...bound to find him.

watch opie location

black start wrote: watch opie location

dais nothing...if he want it i SURE he hav family locally and they could organise him....because the site name after all is TRINI TUNER