TriniTuner.com  |  Latest Event:  

Forums

Blubird Sylphy Owners club

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
Fearless
3NE 2NR for life
Posts: 197
Joined: September 3rd, 2010, 4:36 pm

Re: Blubird Sylphy Owners club

Postby Fearless » March 31st, 2016, 9:16 am

cmg wrote:fellas. looking for foglights for 2010 sylphy. ones with the black finisher


I'm from Port-of-Spain side so I bought mines last year at Raja Auto Parts on the Saddle Road(Febeau Village, San Juan) for $500. I saw them at Bobby's in the bamboo too, for around the same price. If you from a different area maybe another tuner could help.

User avatar
ninjabilly
3NE 2NR for life
Posts: 194
Joined: March 1st, 2013, 8:09 pm

Re: Blubird Sylphy Owners club

Postby ninjabilly » April 9th, 2016, 9:04 pm

Looking to have transmission fluid changed preferably someone/company who specializes in sylphies.

User avatar
Soul Edge
Riding on 13's
Posts: 8
Joined: September 30th, 2010, 8:30 pm
Location: Trinidad

Re: Blubird Sylphy Owners club

Postby Soul Edge » April 29th, 2016, 11:50 pm

Sold

gbarbour
Riding on 13's
Posts: 2
Joined: May 20th, 2016, 4:24 pm

Re: Blubird Sylphy Owners club

Postby gbarbour » May 20th, 2016, 4:32 pm

I just bought a 2009 Sylphy RORO but it does not have a Owners Manual, where can I get one?

gbarbour
Riding on 13's
Posts: 2
Joined: May 20th, 2016, 4:24 pm

Re: Blubird Sylphy Owners club

Postby gbarbour » May 20th, 2016, 4:38 pm

Hi fellers I am looking for a 2009 Owners Manual, any suggestions?

User avatar
nyronoel
Street 2NR
Posts: 45
Joined: April 7th, 2006, 7:35 am
Location: arima

Re: Blubird Sylphy Owners club

Postby nyronoel » May 23rd, 2016, 8:56 pm

help needed looking for engine belt for 2013 sylphy anyone have or know where i would get it

User avatar
chelsealife
Ricer
Posts: 16
Joined: May 27th, 2014, 9:53 pm

Re: RE: Re: Blubird Sylphy Owners club

Postby chelsealife » May 23rd, 2016, 11:55 pm

nyronoel wrote:help needed looking for engine belt for 2013 sylphy anyone have or know where i would get it

Check massy motors

User avatar
nyronoel
Street 2NR
Posts: 45
Joined: April 7th, 2006, 7:35 am
Location: arima

Re: Blubird Sylphy Owners club

Postby nyronoel » May 24th, 2016, 12:03 am

I ordered one for 2013 Sentra and it didn't fix so I'm guessing ones Massy has wouldn't fit

Seanyr2
Riding on 13's
Posts: 14
Joined: June 8th, 2014, 9:58 pm

Re: Blubird Sylphy Owners club

Postby Seanyr2 » May 29th, 2016, 2:24 am

nyronoel wrote:I ordered one for 2013 Sentra and it didn't fix so I'm guessing ones Massy has wouldn't fit

The sentra and sylphy use different engines. The sentra uses the hr16de and the sylphy uses the mrA8.

User avatar
Lean Wid IT
Chronic TriniTuner
Posts: 527
Joined: March 30th, 2006, 11:08 am

Re: Blubird Sylphy Owners club

Postby Lean Wid IT » June 2nd, 2016, 6:22 pm

afternoon guys looking for a good reliable mechanic who knows sylphy well any contacts?

much appreciated

User avatar
innovative audio
Sweet on this forum
Posts: 322
Joined: July 31st, 2004, 2:50 pm

Re: Blubird Sylphy Owners club

Postby innovative audio » June 5th, 2016, 11:24 am

Call me 734-6600

User avatar
Timmydiags
Street 2NR
Posts: 41
Joined: October 29th, 2009, 8:20 am
Location: San Fernando
Contact:

Re: Blubird Sylphy Owners club

Postby Timmydiags » June 5th, 2016, 11:24 pm

Call/Whatsapp Timmy 1868 299 6855

User avatar
Timmydiags
Street 2NR
Posts: 41
Joined: October 29th, 2009, 8:20 am
Location: San Fernando
Contact:

Re: Blubird Sylphy Owners club Call/Whatsapp Timmy 1868 299 6855

Postby Timmydiags » June 5th, 2016, 11:26 pm

Lean Wid IT wrote:afternoon guys looking for a good reliable mechanic who knows sylphy well any contacts?

much appreciated

User avatar
Timmydiags
Street 2NR
Posts: 41
Joined: October 29th, 2009, 8:20 am
Location: San Fernando
Contact:

Re: Blubird Sylphy Owners club

Postby Timmydiags » June 5th, 2016, 11:28 pm

Call/Whatsapp Timmy 1868 299 6855

User avatar
still tippin'
Street 2NR
Posts: 40
Joined: July 16th, 2008, 11:58 pm
Location: West Trinidad

Re: Blubird Sylphy Owners club

Postby still tippin' » July 3rd, 2016, 1:04 pm

Hi. What is the going rate for a set of 4 15 inch steelies with tyres (195/65R15 - about 60% life) and nissan sylphy hubcaps in good condition. Thanks.

User avatar
*OUTSIDER*
Riding on 17's
Posts: 1508
Joined: March 12th, 2008, 6:38 pm
Location: South Ah D Border

Re: Blubird Sylphy Owners club

Postby *OUTSIDER* » August 10th, 2016, 7:23 pm

Hey guys im having a strange problem with my Sylphy... Whenever i starting the engine it tumbles a good few times before it starts. This happens every start not just a cold start. Once start the car idle normal... No stutter/buck nothing. Car drives normal. Just a "hard start" . I install a new battery an the same thing... Anyone ever encounter this problem before?

Note: I full the tank by a different gas station for the first time. Could this be the problem?

User avatar
*OUTSIDER*
Riding on 17's
Posts: 1508
Joined: March 12th, 2008, 6:38 pm
Location: South Ah D Border

Re: Blubird Sylphy Owners club

Postby *OUTSIDER* » August 26th, 2016, 8:37 pm

Hi guys ... Thinking about changing my coolant. What i want to know is what brand recommended, how much , and how do i go about changing it myself?..

Thanks!

User avatar
skylinechild
3ne2nr Toppa Toppa
Posts: 5693
Joined: January 13th, 2008, 11:38 pm
Location: In a Skyline

Re: Blubird Sylphy Owners club

Postby skylinechild » August 28th, 2016, 3:58 am

*OUTSIDER* wrote:Hi guys ... Thinking about changing my coolant. What i want to know is what brand recommended, how much , and how do i go about changing it myself?..

Thanks!


brand is zerex its made for asian vehicles and engines with an aluminum head and block. - other coolants will cause scaling and pitting cause they not designed for engines made from aluminum.

turn off ac set ac temp to hot - so as to allow coolant to pass thru the heater core in the dash.

uncap rad...disconnect lower radiator hose.. drain out.....clean out rad - inspect both hoses replace as necessary...replace thermostat if necessary

reconnect hoses....locate the air bleeder valve on the thermostat housing...and slacken to allow the air to escape when filling up with coolant.... - if your car is not equipped with such you will have to bleed it using a spill free funnel.

a spill free funnel is a simple funnel designed to fit onto the radiator and holds coolant in it...so as fast as air is being displaced from the engine coolant in its place

User avatar
*OUTSIDER*
Riding on 17's
Posts: 1508
Joined: March 12th, 2008, 6:38 pm
Location: South Ah D Border

Re: Blubird Sylphy Owners club

Postby *OUTSIDER* » August 30th, 2016, 7:52 pm

skylinechild wrote:
*OUTSIDER* wrote:Hi guys ... Thinking about changing my coolant. What i want to know is what brand recommended, how much , and how do i go about changing it myself?..

Thanks!


brand is zerex its made for asian vehicles and engines with an aluminum head and block. - other coolants will cause scaling and pitting cause they not designed for engines made from aluminum.

turn off ac set ac temp to hot - so as to allow coolant to pass thru the heater core in the dash.

uncap rad...disconnect lower radiator hose.. drain out.....clean out rad - inspect both hoses replace as necessary...replace thermostat if necessary

reconnect hoses....locate the air bleeder valve on the thermostat housing...and slacken to allow the air to escape when filling up with coolant.... - if your car is not equipped with such you will have to bleed it using a spill free funnel.

a spill free funnel is a simple funnel designed to fit onto the radiator and holds coolant in it...so as fast as air is being displaced from the engine coolant in its place


Thanks alot buddy...

User avatar
skylinechild
3ne2nr Toppa Toppa
Posts: 5693
Joined: January 13th, 2008, 11:38 pm
Location: In a Skyline

Re: Blubird Sylphy Owners club

Postby skylinechild » August 31st, 2016, 10:55 am

*OUTSIDER* wrote:
skylinechild wrote:
*OUTSIDER* wrote:Hi guys ... Thinking about changing my coolant. What i want to know is what brand recommended, how much , and how do i go about changing it myself?..

Thanks!


brand is zerex its made for asian vehicles and engines with an aluminum head and block. - other coolants will cause scaling and pitting cause they not designed for engines made from aluminum.

turn off ac set ac temp to hot - so as to allow coolant to pass thru the heater core in the dash.

uncap rad...disconnect lower radiator hose.. drain out.....clean out rad - inspect both hoses replace as necessary...replace thermostat if necessary

reconnect hoses....locate the air bleeder valve on the thermostat housing...and slacken to allow the air to escape when filling up with coolant.... - if your car is not equipped with such you will have to bleed it using a spill free funnel.

a spill free funnel is a simple funnel designed to fit onto the radiator and holds coolant in it...so as fast as air is being displaced from the engine coolant in its place


Thanks alot buddy...


if youre using a spill free funnel connect the funnel to the rad first...pour in coolant...fill the radiator and fill the funnel about 1/4 way up. start engine and let it idle and reach normal temp. takes about 10-15 mins..... then rev the engine to about 1800-2500 rpm or so - hold the rev till the cooling fans come on.....then release the pedal....check funnel and add coolant...as fast as the air escapes from the rad it will bublbe out thru the funnel and be replaced by coolant from the funnel.

repeat the REV procedure as necessary to get all the air out.

once done put the excess coolant from the funnel into the over flow bottle and cap off the radiator. set the ac temp back to cold.

dont over fill the funnel - about 1/4 to 1/2 way filled with coolant is good while bleeding, and dont ever let the funnel be empty when doing this as you'll be introducing air back into the system....

User avatar
trapstar
3NE 2NR for life
Posts: 159
Joined: November 28th, 2010, 4:37 pm

Re: Blubird Sylphy Owners club

Postby trapstar » November 22nd, 2016, 4:47 pm

anyone have an ac comprosser for mr20 engine

User avatar
b14inb12
Trinituner Peong
Posts: 444
Joined: January 25th, 2008, 5:57 am
Location: trinidad and tobago
Contact:

Re: Blubird Sylphy Owners club

Postby b14inb12 » January 8th, 2017, 4:39 pm

my sylphy horn not working should check below the steering cap or go in to a tech

User avatar
Fearless
3NE 2NR for life
Posts: 197
Joined: September 3rd, 2010, 4:36 pm

Re: Blubird Sylphy Owners club

Postby Fearless » January 15th, 2017, 4:06 pm

b14inb12 wrote:my sylphy horn not working should check below the steering cap or go in to a tech

Check a tech. Spiral cable might be gone.

User avatar
b14inb12
Trinituner Peong
Posts: 444
Joined: January 25th, 2008, 5:57 am
Location: trinidad and tobago
Contact:

Re: Blubird Sylphy Owners club

Postby b14inb12 » January 17th, 2017, 9:18 pm

thanks bro

User avatar
Keiron07.0066
Riding on 13's
Posts: 4
Joined: September 29th, 2010, 9:28 am

Re: Blubird Sylphy Owners club

Postby Keiron07.0066 » February 1st, 2017, 6:54 pm

Hey tuners LF 3 button key fob to buy (lock+unlock+trunk)Image

User avatar
jose123
3NE 2NR for life
Posts: 175
Joined: July 17th, 2006, 12:49 pm
Location: Trinidad

Re: Blubird Sylphy Owners club

Postby jose123 » February 4th, 2017, 7:11 am

For all the companies advertising FOBs on FB this was the only one that replied and actually tested one on a car to see how and if it works, so I'd recommend them
https://www.facebook.com/RandRTradingCo.Ltd/

wonder
Street 2NR
Posts: 54
Joined: December 3rd, 2011, 12:57 pm

Re: Blubird Sylphy Owners club

Postby wonder » February 5th, 2017, 9:05 am

morning fellas i hav a 2013 sylphy what i would like to find out is would the cv joint from the 2011 work on the 2013 apparently massy aint start to stock them as yet

Playinmad
Riding on 13's
Posts: 2
Joined: February 7th, 2017, 3:36 pm

Re: Blubird Sylphy Owners club

Postby Playinmad » February 7th, 2017, 3:44 pm

Can anyone tell me how I can solve the engine sputter on startup?

Playinmad
Riding on 13's
Posts: 2
Joined: February 7th, 2017, 3:36 pm

Re: Blubird Sylphy Owners club

Postby Playinmad » February 11th, 2017, 5:34 pm

*OUTSIDER* wrote:Hey guys im having a strange problem with my Sylphy... Whenever i starting the engine it tumbles a good few times before it starts. This happens every start not just a cold start. Once start the car idle normal... No stutter/buck nothing. Car drives normal. Just a "hard start" . I install a new battery an the same thing... Anyone ever encounter this problem before?

Note: I full the tank by a different gas station for the first time. Could this be the problem?


I'm having the same problem did you ever get it sorted out. If so can you advise what to do

User avatar
jose123
3NE 2NR for life
Posts: 175
Joined: July 17th, 2006, 12:49 pm
Location: Trinidad

Re: Blubird Sylphy Owners club

Postby jose123 » February 14th, 2017, 7:33 am

Anybody know how to/ can adjust the lights on the B17?
I find they are too low. At night they are bright, just don't illuminate very far.

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 7 guests