Page 1 of 1
help wanted: Almera qg16 not starting
Posted: March 14th, 2013, 6:12 pm
by nismo8300
change cam and crank sensors, did a diagnostic with Launch scan tool no errors came up, checked coil pack, checked fuel, still nothing has anyone had this problem???? let me know thanks.
Re: help wanted: Almera qg16 not starting
Posted: March 19th, 2013, 9:34 pm
by dutyspeed
my friend was experiencing some similar probs to urs,changed ecu(brain box) and problem was solved
Re: help wanted: Almera qg16 not starting
Posted: March 20th, 2013, 12:34 am
by QG
Is it tumbling when you try?
Re: help wanted: Almera qg16 not starting
Posted: March 20th, 2013, 9:14 am
by blacklight
Is the engine getting gas?
Re: help wanted: Almera qg16 not starting
Posted: March 25th, 2013, 1:06 am
by *$kїđž!™
More details needed op
Re: help wanted: Almera qg16 not starting
Posted: March 29th, 2013, 8:13 pm
by GAK Electrical
I am having this same problem with my Nissan B12 QG almera engine swap.
This also happened to me in a civic with a kill switch that had the same issue and the car just cut power on me while driving and it was because my kill switch solder broke and the circuit was set to on killing fuel to the engine.
Same exact thing happened in the B12 while driving.
I have been reading up that an issue with these engines is the immobilizer malfunctioning which is built into the ECU of the engine (so there is no wire to try a thing) from what I gather I may be wrong.
Is there anyway to fix this without changing the ECU ?