trinituner.com

So the usual B11 stuff.. post any and everything on B11's here

Feel free to post, y'all know the routine..

start it..lol

LOL man say start the club yes.. your sunny looking rell crisps dan
like it hardly have B11 men on tuner..I'll see if I can organise some pics of my car.

present

word!! like it hardly have B11 men here but never the less..
must start it somewhere

b15/y11/n16 condenser is a great A/C efficiency upgrade...easy to work up!!

^just so?out of the blue?

Is a contribution to the thread...chip in to na

what shock upgrade yall know about for the back suspension?

the rear suspension is a misery. Although i heard men say use 120Y shocks...i'm not too sure on that.
The way that independent suspension is made up the shock and spring separate. To get something to work there is a trial and error job.
Currently my B11 has the stock shocks in the rear about 1 joint cut off the springs and the ride is not bad at all all..it is not bouncy compared to most sunny's I see.

A little teaser pic I dug up..

nice....!!

Brake upgrade:

front
To upgrade the front brakes, the user will have to change the car's front spindles to b15 (or similar). The ball joint is a bit too small, so a bushing will have to be made for proper fitment. The spacing between the bolts that bolt shock to spindle is also too small, so the top hole on the shock will have to be elongated a bit (1/4'' iirc).

With the b15 spindles, you can have a world of brake upgrades. You can use the b15 brake setup itself, the u14, p11, y11 wingroad, n16 etc. You can even install the skyline/300zx with some modification to the skyline rotors.

rear
the oem rear disc brake is almost impossile to get. User d_sunnyboi has a real decent rear disc brake conversion. i will let him give the details of this as he has already done it and knows all the details of the conversion.

my brake upgrades...

Well, you spoke to me and told me the details, but make a lil post about it so that in 2 or 3 years time, it will be around for another b11 like me and you wouldn't be as badly off as we when we started.

d_sunnyboi build. He car fresh, trust meh.

viewtopic.php?f=21&t=476083&start=150

amazing build here..those rims

here's a link to thread: http://www.cardomain.com/ride/3103248/1986-nissan-sunny/

hey this is what we need http://www.andysautosport.com/nissan/1982_1986_sentra/suspension/sway_bars/addco/
^^^^cornering for dayz

d_sunnyboi don't forget i checking you for d strut bar!

i always love a sunny eh but not so much with the side and rear flare stuff....i had a front lip till someone took it..lol...got back a skin but haven't gotten around to make it yet

yea but you eh tell me nothing since...it there man..

I actually saw one of that locally too. Pand said he took it off a b11 turbo front cut....

anybody here know how to wire an e15et?

black start wrote:I actually saw one of that locally too. Pand said he took it off a b11 turbo front cut....

anybody here know how to wire an e15et?

check me 5 mins work

I never say it was me

I wish though....hehehe....

I hada check you though.....

any of you tuners could assist me in locating and center console for me please, need one so i could hide the brainbox under it...gray interior!!!...specific the section that fills the gap from the dash to the handbrake section

just an edit...

Do it in an charcoal grey nuh....with matte black rims..

I got a problem with the A\C, it only works when the switch is on 3. I had the switch tested already and that works fine. I was told I need a new resistor. Can anyone link me as to where I can get a new one or a suitable substitute/fix

d_sunnyboi wrote:just an edit...

sunny_boi yuh different jed..I notice the big brakes upgrade to the pic

dandadda007 wrote:I got a problem with the A\C, it only works when the switch is on 3. I had the switch tested already and that works fine. I was told I need a new resistor. Can anyone link me as to where I can get a new one or a suitable substitute/fix

As for this you could check Chuna's auto parts Cacandee Road, Felicity, Chaguanas. Lots of old model parts. Here are the numbers could call before allyuh waste ah run: 672-7765, 461-0925

GA-16 Engine and Box...
so last night my car working perfect..time to come home now the car didn't want to start it just tumbling. Eventually it started as I accelerated the car started to buck (like if is a gas problem). After a ten minutes the car started to work normal..this morning i tried to start it and it's really difficult to start. All the stated below have been changed and cleaned for the X-mas.
new fuel filter
new plugs and plug wires
cleaned throttle body
cleaned tps sensor
cold start working good
B14 fuel pump installed
ANYONE HAVE AN IDEA WHAT COULD CAUSE THIS?

crank sensor..if any

teaser pic