TriniTuner.com  |  Latest Event:  

Forums

Y12 Wingroad questions??

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
Premera
Trinituner Peong
Posts: 411
Joined: November 10th, 2006, 5:42 pm
Location: Up North

Re: Y12 Wingroad questions??

Postby Premera » February 9th, 2014, 6:38 am

fellas, anyone else looking to do a fluid change in their wagon ? I looking to buy engine oil, filters, and CVT fluid too. Maybe be could all link up and buy at bulk price ?

User avatar
intelMAX
3NE 2NR for life
Posts: 156
Joined: February 2nd, 2012, 11:06 am
Location: ///////

Re: Y12 Wingroad questions??

Postby intelMAX » February 15th, 2014, 10:17 pm

Anyone knows where the cabin filter is located, I removed the glove box thinking it would have been behind there.

User avatar
Premera
Trinituner Peong
Posts: 411
Joined: November 10th, 2006, 5:42 pm
Location: Up North

Re: Y12 Wingroad questions??

Postby Premera » February 16th, 2014, 8:20 am

Its right there bro, unless it was removed or worn out. Look on the right side when u remove the glove box and u will see it or something looking like a grill ( mine was cut or worn out, i saw it and looked past it multiple times too )

User avatar
intelMAX
3NE 2NR for life
Posts: 156
Joined: February 2nd, 2012, 11:06 am
Location: ///////

Re: Y12 Wingroad questions??

Postby intelMAX » February 16th, 2014, 11:16 am

Thanks, will check back.

User avatar
QG
punchin NOS
Posts: 3545
Joined: July 18th, 2006, 9:56 pm
Location: South

Re: Y12 Wingroad questions??

Postby QG » February 19th, 2014, 10:20 pm

Its more at the center behind the ac controls. mines has a bracket which is screwed down. You need to look attentively in order to locate it.

RAJIE
Sweet on this forum
Posts: 370
Joined: January 17th, 2011, 1:06 am

Re: Y12 Wingroad questions??

Postby RAJIE » February 20th, 2014, 8:45 am

my ac blower stop coming on just so and i seeing a white connector not connected
and i not sure where it goes

anyone have any ideas?

chris
Street 2NR
Posts: 52
Joined: February 17th, 2006, 1:28 pm

Re: Y12 Wingroad questions??

Postby chris » February 20th, 2014, 8:13 pm

Did anyone change cradle bushing? Is the Rbi bushing good? Thinking of ordering a set of Roca brand bushing from ebay, did anyone every used that brand?

User avatar
ST Auto
3NE 2NR Power Seller
Posts: 1052
Joined: June 30th, 2010, 10:09 am

Re: Y12 Wingroad questions??

Postby ST Auto » February 20th, 2014, 8:42 pm

Rbi bushing dont last long.

User avatar
IvanTerrors
Trinituner Peong
Posts: 497
Joined: July 25th, 2007, 8:53 pm
Location: Trinidad
Contact:

Re: Y12 Wingroad questions??

Postby IvanTerrors » February 20th, 2014, 8:46 pm

Rbi is the best thus far all others waste a time

User avatar
ST Auto
3NE 2NR Power Seller
Posts: 1052
Joined: June 30th, 2010, 10:09 am

Re: Y12 Wingroad questions??

Postby ST Auto » February 20th, 2014, 8:49 pm

The rbi gave me 3 months...

javishm
punchin NOS
Posts: 4693
Joined: May 23rd, 2012, 11:06 pm
Location: St Anns Medical

Re: Y12 Wingroad questions??

Postby javishm » February 24th, 2014, 11:00 am

WTK if anyone has their original Wingroad/Tiida exhaust barrel and willing to part with if either give away or sell

Pm me please

RAJIE
Sweet on this forum
Posts: 370
Joined: January 17th, 2011, 1:06 am

Re: Y12 Wingroad questions??

Postby RAJIE » March 6th, 2014, 12:29 pm

where the y12 blower motor?
anyone can help me locate it ?

fisherman84
Riding on 13's
Posts: 2
Joined: May 8th, 2012, 2:54 am

Re: Y12 Wingroad questions??

Postby fisherman84 » March 18th, 2014, 8:31 am

Repu Auto in Marabella have the sub frame bushing... $150.00 for one

eggman
Street 2NR
Posts: 43
Joined: April 17th, 2010, 7:03 am
Location: tunapuna
Contact:

Re: Y12 Wingroad questions??

Postby eggman » March 18th, 2014, 8:50 am

Anyone recommendations for someone to replace my evaporator?

kandikane
Riding on 13's
Posts: 2
Joined: June 23rd, 2010, 11:03 am

Re: Y12 Wingroad questions??

Postby kandikane » April 5th, 2014, 11:29 am

where is the fuel filter located

User avatar
Justshawn
Riding on 13's
Posts: 3
Joined: April 23rd, 2013, 10:56 pm

Re: Y12 Wingroad questions??

Postby Justshawn » August 13th, 2014, 12:31 pm

can the y12 wingroad tailgate fit on the y12 ad wagon exact?

User avatar
Seedragon
Street 2NR
Posts: 81
Joined: April 22nd, 2009, 2:13 pm
Location: North / East
Contact:

Re: Y12 Wingroad questions??

Postby Seedragon » September 4th, 2014, 2:09 pm

PPl,
This is my take on the Gas topic -

I bought my Y12 last year RORO from someone who had it a few months, they used super gas so I continued to used it.

My mechanic told me to switch to Premium gas but I say it too costly and the car works well wit super, 'low and behold' 11 months after the car 'cutting off' on and off, the engine light came on and burning real gas.

After checks and various scans it was found the O2 censor ( manifold ) gone and the main cause was the type of fuel used 'Super' - after further checks / talks with the Massy Mechanic it was confirmed.

I changes the censor and using Premium gas and all is well thus far.

BTW - I know ppl using "super" and 'Premium' gas in Tiida and 12Y RORO and local they all are different for some reason.

User avatar
spr@ng@23
Ricer
Posts: 18
Joined: April 18th, 2006, 9:11 pm

Re: Y12 Wingroad questions??

Postby spr@ng@23 » October 28th, 2014, 8:09 am

Can you advise on what spark plugs to use on the Y12?

RAJIE
Sweet on this forum
Posts: 370
Joined: January 17th, 2011, 1:06 am

Re: Y12 Wingroad questions??

Postby RAJIE » November 25th, 2014, 4:58 pm

Anyone ever changed cvt fluiid in their y12?

User avatar
rane
Trinituner Peong
Posts: 428
Joined: November 5th, 2013, 1:53 pm

Re: Y12 Wingroad questions??

Postby rane » November 25th, 2014, 9:39 pm

Yea it hav a gyal in work by us a guy who works at massy services her y12 an using super no problem at all once ur vehicle on a routine maintenance u ought to have no problem at all.

Cvt fluid ns2 fluid federal on cipero st have

zanemo
3NE 2NR for life
Posts: 127
Joined: June 7th, 2011, 7:54 pm

Re: Y12 Wingroad questions??

Postby zanemo » November 26th, 2014, 8:43 pm

RAJIE wrote:Anyone ever changed cvt fluiid in their y12?


yup...... ns2 ..... vacuum flush ..... used 2 galls and 1 quart

User avatar
spr@ng@23
Ricer
Posts: 18
Joined: April 18th, 2006, 9:11 pm

Re: Y12 Wingroad questions??

Postby spr@ng@23 » December 5th, 2014, 2:43 pm

anyone encountered cradle problems?

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: Y12 Wingroad questions??

Postby Ted_v2 » December 5th, 2014, 5:19 pm

Normal problems. Simple fix

User avatar
eViLwOn
I LUV THIS PLACE
Posts: 1027
Joined: October 24th, 2010, 2:21 pm
Location: Between Sando and Couver...

Re: Y12 Wingroad questions??

Postby eViLwOn » December 14th, 2014, 5:15 pm

Did a scan by Ryan at Ryotech and was told that my Output Speed Sensor is faulty.
Does anyone know where I may purchase this sensor used?

TIA...

User avatar
skylinechild
3ne2nr Toppa Toppa
Posts: 5693
Joined: January 13th, 2008, 11:38 pm
Location: In a Skyline

Re: Y12 Wingroad questions??

Postby skylinechild » December 14th, 2014, 9:35 pm

eViLwOn wrote:Did a scan by Ryan at Ryotech and was told that my Output Speed Sensor is faulty.
Does anyone know where I may purchase this sensor used?

TIA...


i'd recommend you dont buy used sensors thats cat in bag business.
if u buy a defective unit - theres no refund on electronic parts :!:

javishm
punchin NOS
Posts: 4693
Joined: May 23rd, 2012, 11:06 pm
Location: St Anns Medical

Re: Y12 Wingroad questions??

Postby javishm » January 5th, 2015, 5:44 pm

which k&n filter fits the wingroad y12 model?

User avatar
trini mk5
punchin NOS
Posts: 2744
Joined: November 15th, 2007, 3:13 pm
Location: In the land of the un-free

Re: Y12 Wingroad questions??

Postby trini mk5 » January 18th, 2015, 12:45 am

Hey guys, just wanted to know if i can buy a roll on roll off y12 wingroad with a 4 speed AT and not a CVT tranny? What model number or feature do i look for to make the distinction?

User avatar
spr@ng@23
Ricer
Posts: 18
Joined: April 18th, 2006, 9:11 pm

Re: Y12 Wingroad questions??

Postby spr@ng@23 » January 22nd, 2015, 8:56 am

Looking to change the door speakers on my Y12 (myself)

Can anyone guide me on the steps to remove the front door panel?

User avatar
spr@ng@23
Ricer
Posts: 18
Joined: April 18th, 2006, 9:11 pm

Re: Y12 Wingroad questions??

Postby spr@ng@23 » January 28th, 2015, 7:46 am

any help guys???

User avatar
IvanTerrors
Trinituner Peong
Posts: 497
Joined: July 25th, 2007, 8:53 pm
Location: Trinidad
Contact:

Re: Y12 Wingroad questions??

Postby IvanTerrors » January 28th, 2015, 10:17 am

Pry out trim in front of door handle
Raise window button piece with flathead screw driver
Unplug Jack
You will see two screws remove
Pry from the bottom the skin off door cooking all the way around
Raise in upward motion and it's off

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 11 guests