TriniTuner.com  |  Latest Event:  

Forums

SIMPLE BRAKE UPGRADES

Sunny to Skyline - SR20, CA18, RB20-26, VG30 etc.

Moderator: 3ne2nr Mods

User avatar
Mobile-Authority
Ricer
Posts: 29
Joined: March 2nd, 2008, 6:34 pm
Location: Princes Town
Contact:

Re: SIMPLE BRAKE UPGRADES

Postby Mobile-Authority » June 7th, 2014, 12:04 am

i have a Y11 4wd
came with a qg18

wht brakes can i use ?
my bolt pattern is 4x114

i changed to drilled rotors for almera but i hearing a lil noise on one side
:S idk wht is it cause everyting bolt up normal

User avatar
yakuza
I LUV THIS PLACE
Posts: 954
Joined: June 13th, 2007, 1:46 pm

Re: SIMPLE BRAKE UPGRADES

Postby yakuza » June 15th, 2014, 7:58 pm

Mobile-Authority wrote:i have a Y11 4wd
came with a qg18

wht brakes can i use ?
my bolt pattern is 4x114

i changed to drilled rotors for almera but i hearing a lil noise on one side
:S idk wht is it cause everyting bolt up normal


yakuza wrote:W10 avenir 11” rotors and double piston callipers, direct bolt on for P10, P11, U13, U14, B15, N16, Y11-wingroad.
This set up can be found on the W10 Avenir and U13 bluebird that came with SR20DET, these disc pads are the same as A33 Cifero/Maxima.
11”rotors and large single piston callipers from the SR20VE equipped Y11 ZV-S, U14 and P11 are a direct bolt on for P10, P11, U13, U14, B15, N16, Y11-Wingroad also.

User avatar
swagz
Riding on 13's
Posts: 4
Joined: June 27th, 2013, 8:50 am

Re: SIMPLE BRAKE UPGRADES

Postby swagz » June 19th, 2014, 8:49 pm

Good day, I have an n16, recently did a rear conversion from drum to disc from the primera. I wanna upgrade the front as well. Thinking of the 11inch rotors with dual piston calipers. And upgrade the rear with the a33 rotors and calipers.
Question is would I need to change booster and master cylinder to get increased braking performance?
I currently have a 7/8 mc and a dual diaphragm. Looking to upgrade my qg18 to sr20ve.

User avatar
ruff neck chicken
3NE2NR is my LIFE
Posts: 702
Joined: July 19th, 2007, 2:12 pm
Location: Behind a desk

Re: SIMPLE BRAKE UPGRADES

Postby ruff neck chicken » September 28th, 2014, 11:01 am

i got the ADV22F on a B14 and would like to get steel braided lines for the setup. do i buy the same B14 brake lines are the fittings the same?

http://performance.importrp.com/goodrid ... 97638.aspx

anyone got part numbers for any good brake pads for the ADV22F brake set up?

User avatar
X_Factor
TriniTuner 24-7
Posts: 9524
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

Re: SIMPLE BRAKE UPGRADES

Postby X_Factor » September 28th, 2014, 12:31 pm

http://www.amazon.com/gp/product/B001C8 ... UTF8&psc=1

those worked really nice

as for the brake lines, i bought regular b14 lines and they worked easily

User avatar
ruff neck chicken
3NE2NR is my LIFE
Posts: 702
Joined: July 19th, 2007, 2:12 pm
Location: Behind a desk

Re: SIMPLE BRAKE UPGRADES

Postby ruff neck chicken » September 28th, 2014, 1:28 pm

i tried searching for that part number on ebc's website but no results :?
do you know the option in green stuff or anything a bit more than oem?

User avatar
yakuza
I LUV THIS PLACE
Posts: 954
Joined: June 13th, 2007, 1:46 pm

Re: SIMPLE BRAKE UPGRADES

Postby yakuza » September 28th, 2014, 2:04 pm

Stick to something of OEM quality, I don't recommend green stuff for a daily driver, the pads ware in no time and they are not forgiving on rotors.
Some brands you can check out are Hawk or PBR AXXIS.

User avatar
ruff neck chicken
3NE2NR is my LIFE
Posts: 702
Joined: July 19th, 2007, 2:12 pm
Location: Behind a desk

Re: SIMPLE BRAKE UPGRADES

Postby ruff neck chicken » September 28th, 2014, 2:19 pm

ok thanks for the heads up on the daily driving. i will try the ebc oem replacements while i find the hawk options. part number?

User avatar
X_Factor
TriniTuner 24-7
Posts: 9524
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

Re: SIMPLE BRAKE UPGRADES

Postby X_Factor » September 28th, 2014, 3:32 pm

what engine setup you have?

User avatar
yakuza
I LUV THIS PLACE
Posts: 954
Joined: June 13th, 2007, 1:46 pm

Re: SIMPLE BRAKE UPGRADES

Postby yakuza » September 28th, 2014, 3:43 pm

One that requires better brakes than AD22VF.

User avatar
X_Factor
TriniTuner 24-7
Posts: 9524
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

Re: SIMPLE BRAKE UPGRADES

Postby X_Factor » September 28th, 2014, 5:41 pm

hahaha
well link up the man nah boy!

User avatar
THE SYNDICATE
punchin NOS
Posts: 3885
Joined: February 13th, 2007, 9:13 am
Location: Progress Breeds Hate...

Re: SIMPLE BRAKE UPGRADES

Postby THE SYNDICATE » September 28th, 2014, 9:32 pm

I use nationals.

Sr20de

User avatar
ruff neck chicken
3NE2NR is my LIFE
Posts: 702
Joined: July 19th, 2007, 2:12 pm
Location: Behind a desk

Re: SIMPLE BRAKE UPGRADES

Postby ruff neck chicken » September 29th, 2014, 2:01 am

my setup might need more than the AD22VF but that is just more weight so i'm just trying to maximize what i can get out of these. good rotors, pads, steel braided lines for now.

User avatar
THE SYNDICATE
punchin NOS
Posts: 3885
Joined: February 13th, 2007, 9:13 am
Location: Progress Breeds Hate...

Re: SIMPLE BRAKE UPGRADES

Postby THE SYNDICATE » October 2nd, 2014, 8:02 pm

This is what I upgraded to from the ad18v's.

ImageUploadedByTriniTuner1412294516.912596.jpg

MZ88
Riding on 13's
Posts: 5
Joined: June 12th, 2011, 1:40 pm

Re: SIMPLE BRAKE UPGRADES

Postby MZ88 » November 10th, 2014, 6:05 pm

hello,

what brakes upgrade would you recommend for a 2009 tiida hatchback, my car is supercharged and the brake system doesn't match the car speed.

subie_2NR
3NE 2NR for life
Posts: 180
Joined: January 11th, 2014, 9:36 am

Re: SIMPLE BRAKE UPGRADES

Postby subie_2NR » November 10th, 2014, 6:12 pm

MZ88 wrote:hello,

what brakes upgrade would you recommend for a 2009 tiida hatchback, my car is supercharged and the brake system doesn't match the car speed.


Double piston brake setup from a Nissan, steel braided lines & rear disc conversion

User avatar
nicko
Ricer
Posts: 28
Joined: July 17th, 2011, 7:55 pm

Re: SIMPLE BRAKE UPGRADES

Postby nicko » June 6th, 2015, 12:22 am

what do you guys recommend for a rear upgrade for a b14 i did the p11m6 conversion for the front and wanted to know if i need an entire p11 banjo or just spindles for the back so ill be far hole pattern through out

LadiesMan217
Riding on 13's
Posts: 2
Joined: June 6th, 2015, 3:47 pm

Re: SIMPLE BRAKE UPGRADES

Postby LadiesMan217 » June 7th, 2015, 1:02 am

yakuza wrote:P11 rear disc set up is a direct bolt up for N16, B15, however the later model N16 and B15 ABS system is not compatible with the P11 ABS system.

W11 Avenir 11"x1" rotors and double piston calipers are a direct bolt on upgrade for A33.

P11/Y11 (SR20VE equipped) 11"rotors and calipers are a direct bolt on upgrade for B15 and N16, as well as P11 and Y11 (non AD wagon) that came with 10" rotors.


Will B14 manual front axle splines mesh correctly on B15 front spindles??
Thanks..

SENTEKS
Riding on 13's
Posts: 3
Joined: November 29th, 2014, 5:42 pm

Re: SIMPLE BRAKE UPGRADES

Postby SENTEKS » July 19th, 2015, 11:31 am

Hi guys , o have b11 , and i will replace my rear drums to a p11 primera disc brakes. Do i need to replace my stock mc ? front brackes are stock.

User avatar
X_Factor
TriniTuner 24-7
Posts: 9524
Joined: April 27th, 2003, 5:54 pm
Location: St. Augustine
Contact:

Re: SIMPLE BRAKE UPGRADES

Postby X_Factor » July 21st, 2015, 2:22 pm

anyone ever bought disc pads off amazon for an almera?
if so care to share a link....looking at raybestos and akebono but not sure of the part number

Death_ride
3NE 2NR for life
Posts: 113
Joined: January 13th, 2007, 1:02 pm
Location: South & North

Re: SIMPLE BRAKE UPGRADES

Postby Death_ride » August 10th, 2015, 10:16 pm

Best front brakes upgrade keeping the bolt line up 4x100? b14 splines must be able to work.

User avatar
black start
TriniTuner 24-7
Posts: 7974
Joined: February 25th, 2010, 10:42 am
Location: conquering the pothole solodex

Re: SIMPLE BRAKE UPGRADES

Postby black start » August 10th, 2015, 10:59 pm

Y11 ad

User avatar
yakuza
I LUV THIS PLACE
Posts: 954
Joined: June 13th, 2007, 1:46 pm

Re: SIMPLE BRAKE UPGRADES

Postby yakuza » August 11th, 2015, 4:20 am

AD wagon calipers won't bolt on B14 spindles.

The biggest bolt on brake upgrade for B14 spindles is the Wilwood set up.

Other than that it's AD22VF.

Death_ride
3NE 2NR for life
Posts: 113
Joined: January 13th, 2007, 1:02 pm
Location: South & North

Re: SIMPLE BRAKE UPGRADES

Postby Death_ride » August 11th, 2015, 5:00 am

if i had to put a w10 avenir upgrade what must done to make it work? thats the double piston version...

User avatar
yakuza
I LUV THIS PLACE
Posts: 954
Joined: June 13th, 2007, 1:46 pm

Re: SIMPLE BRAKE UPGRADES

Postby yakuza » August 11th, 2015, 7:49 am

AD (Y11) wagon spindles

triplef_17
Riding on 13's
Posts: 9
Joined: January 28th, 2011, 7:46 pm

Re: SIMPLE BRAKE UPGRADES

Postby triplef_17 » August 11th, 2015, 4:10 pm

What about a brakes upgrade for a tb17 sylphy??
Last edited by triplef_17 on November 22nd, 2015, 11:24 pm, edited 1 time in total.

User avatar
skylinechild
3ne2nr Toppa Toppa
Posts: 5693
Joined: January 13th, 2008, 11:38 pm
Location: In a Skyline

Re: SIMPLE BRAKE UPGRADES

Postby skylinechild » October 1st, 2015, 7:04 am

good day gents....planining a brake upgrade on my u14
for the front i'm planing on using the skyline R32 rotor and caliper.
i already know the rotor has to be re drilled to 4 X 114 and shaved a couple thousandths off the circumference.
caliper will be sandblasted /powder coated and rebuilt before use. ( new seals en route)

for the rear i'm going with the disc brake assembly for the u14 -oem stuff.

only thing i need help with is steel braided lines. where can i get and is there any sort of specific size to it.??

User avatar
yakuza
I LUV THIS PLACE
Posts: 954
Joined: June 13th, 2007, 1:46 pm

Re: SIMPLE BRAKE UPGRADES

Postby yakuza » October 1st, 2015, 8:32 am

The Goodridge B14 steel braided lines will work, part# 22043.

User avatar
Ted_v2
TriniTuner 24-7
Posts: 11399
Joined: March 30th, 2010, 8:58 pm

Re: SIMPLE BRAKE UPGRADES

Postby Ted_v2 » October 1st, 2015, 8:56 am

If you looking for something local. Trinidad hose does braided brake lines. Heard plenty good reviews from people.

User avatar
skylinechild
3ne2nr Toppa Toppa
Posts: 5693
Joined: January 13th, 2008, 11:38 pm
Location: In a Skyline

Re: SIMPLE BRAKE UPGRADES

Postby skylinechild » October 1st, 2015, 2:21 pm

yakuza wrote:The Goodridge B14 steel braided lines will work, part# 22043.


thank you kindly sir... :oops: another noob question..where can i purchase em..iirc nick (tuner imports) has goodridge...do i just walk in and tell him the part # for the brake hose?? :oops:

Ted_v2 wrote:If you looking for something local. Trinidad hose does braided brake lines. Heard plenty good reviews from people.


thought about them but i do not know the type of fitting used or size of fitting on the end of the hose :oops: better i just go with something already made with correct ends.

anything else i need to know about brakes before i do this upgrade.???
do i need to change my booster..??

Advertisement

Return to “NISSAN”

Who is online

Users browsing this forum: No registered users and 8 guests