Page 1 of 1
P11 Brakes problems ASAP
Posted: July 31st, 2009, 3:43 pm
by IDRC
ok so i changing my rotors and calipers on my primera
does anyone know if the two pins in the calipers supposed to slide or just one
cause i only getting one to move the other one not
Posted: July 31st, 2009, 3:53 pm
by .:PROZAC:..
both should be free to move.
Posted: July 31st, 2009, 3:54 pm
by IDRC
thought so
Posted: July 31st, 2009, 8:08 pm
by 7143
yup both suppose to move......
Posted: August 1st, 2009, 11:07 am
by IDRC
thanks guys
Posted: August 1st, 2009, 11:08 am
by IDRC
how do i get them to free up. right now i soaking them in brakes fluid
Posted: August 3rd, 2009, 9:08 am
by navinmadhoo
use some wd40
Posted: August 3rd, 2009, 9:22 am
by IDRC
brakes fluid not even working
Posted: August 4th, 2009, 11:04 am
by 7143
take out the pins use a lil sand paper and sand out the smoothe surface a bit then sand out the bore and see if that helps......use some wd40 and mount up back and try.....
Posted: August 14th, 2009, 2:28 pm
by taz turbo
boy my padna had a bluebird an he own seize---- we try to use a pipe wrench an dat didn wuk so we buy a foreign used one