WTK: how to remove speed cut in sr20?
Posted: December 11th, 2008, 11:37 am
How can the speed cut be disabled on an sr20?
trinituner.com
T&T's Largest Automotive Website
https://trinituner.com/v4/forums/
WTK: how to remove speed cut in sr20?
https://trinituner.com/v4/forums/viewtopic.php?f=21&t=222219
Page 1 of 1
Posted: December 11th, 2008, 12:48 pm
yuh have a pliers?
Posted: December 11th, 2008, 1:49 pm
upgraded ECU with speed cut removed or HKS or Pivot both have inline units you can wire in.
Re: WTK: how to remove speed cut in sr20?
Posted: December 15th, 2008, 9:45 pm
demented wrote:How can the speed cut be disabled on an sr20?
also known as top speed limiter....
get a pliers and cut the signal wire.....OR upgrade the ECU with an aftermarket one....
Re: WTK: how to remove speed cut in sr20?
Posted: January 15th, 2011, 8:31 am
Just doing some research and wanna re-open up this topic.
Alot of people are recommending cutting the speed signal wire to get rid of the speed cut, but in doing so problems arise.
1.Troubles with idle when coming to a stop.
2. Engine just stalls sometimes
Does or have anyone experience these problems ?
Alot of people are recommending cutting the speed signal wire to get rid of the speed cut, but in doing so problems arise.
1.Troubles with idle when coming to a stop.
2. Engine just stalls sometimes
Does or have anyone experience these problems ?
Re: WTK: how to remove speed cut in sr20?
Posted: January 16th, 2011, 1:19 pm
there is the hks scd and the greddy scd.
Re: WTK: how to remove speed cut in sr20?
Posted: January 16th, 2011, 4:34 pm
^^^what he said!
Re: WTK: how to remove speed cut in sr20?
Posted: January 16th, 2011, 8:40 pm
Sooooooo 180km/h not good enuff? 
Allyuh doh take on me eh my lowport does 200km/h normel normel
Allyuh doh take on me eh my lowport does 200km/h normel normel
Re: WTK: how to remove speed cut in sr20?
Posted: January 17th, 2011, 7:52 am
V2NR 3.0 wrote:Just doing some research and wanna re-open up this topic.
Alot of people are recommending cutting the speed signal wire to get rid of the speed cut, but in doing so problems arise.
1.Troubles with idle when coming to a stop.
2. Engine just stalls sometimes
Does or have anyone experience these problems ?
No but when i hit 180km it stalls for about 3sec an then it continues.I then hooked up a HKS speed cut defender an the problem was solved
Re: WTK: how to remove speed cut in sr20?
Posted: January 17th, 2011, 10:24 am
Check prentice he has the greddy speed cut controller for $1000 installed...
Re: WTK: how to remove speed cut in sr20?
Posted: September 10th, 2014, 10:16 pm
Anybody hook up a greddy to a sr20vvl on a p11 yet?i followed the instructions and installed but speedo still limitin...computer hooked up says 232kmph but speedo lockin off at 200,,,,......