Page 1 of 1
Acceleration problems wing road Y10
Posted: April 5th, 2007, 12:23 pm
by shamzipi
tuners,
the car is surging foward.
when i mash the x at one constant level the car is shooting foward and dying down constantly.
it even cuts of occasionaly.
Problem started day before but due to work i eh reach d mechanic yet.
What could be my problem???
Posted: April 6th, 2007, 12:40 am
by Dragsta
Sounds like Fuel filter clogged or injector rell bad, or Fuel Pump/pressure or plugs Breakin down......could be ur Air Flow Meter too
Posted: April 6th, 2007, 1:59 am
by Anil_Sooknanan
Sounds like Fuel filter clogged or injector rell bad, or Fuel Pump/pressure or plugs Breakin down......could be ur Air Flow Meter too
wham boy dragsta geh meh ah chance nah boy yuh rushing meh

say what great minds think alike
Posted: April 7th, 2007, 4:27 pm
by shamzipi
well i gettin the injectors serviced today so i will relate the results
Posted: April 10th, 2007, 9:28 am
by shamzipi
Serviced the injectors, changed plugs and ran a diagnostic check which showed the airflow sensor to be faulty.
getting it repaired today......
Posted: April 10th, 2007, 11:42 am
by Anil_Sooknanan
ok cool glad to know yuh get tru and thanks for lletting everyone know what the problem was

Posted: April 10th, 2007, 3:58 pm
by MagikDragon
guys sometimes u just need 2 clean the sensor wit some intake cleaner. especially with a cheap cone filter installed the AFS does get dirty an send bad readings to the ECU.......
Posted: April 11th, 2007, 9:36 pm
by Dragsta
guys sometimes u just need 2 clean the sensor wit some intake cleaner
u mean like a Bars- tech or Gum Solve
is it safe to do so....it would damage d sensor right

Posted: April 12th, 2007, 3:28 am
by Anil_Sooknanan
i does always use them stuff on the air flow and trottle body never got any problems yet

Posted: April 13th, 2007, 11:44 pm
by Dragsta
Cool, will try it sometime..

Re: Acceleration problems wing road Y10
Posted: November 13th, 2015, 10:30 am
by Dragon001
it have a mass air flow sensor aerosol cleaner.
just saying