*OFFICIAL NISSAN B11 CLUB*

[black start]

^that real hard to get....why not try to make one?

[d_sunnyboi]

That would be last resort..I want it look complete with the dash...if it comes to making it I have one that I borrowed so I'll make a fiber glass replica made but would have to find somwone to make it.

[black start]

there's a guy on the southern main road to chaguanas that does real neat fiberglass work.

[twisted concepts]

LF...any of y'all selling/know/where/who have a b11 luxury type center console to sell?..i'm WILLING TO PAY your price for it cuz i need one to hide my ecu, preferably in gray but that is minor and must not have any cracks.

offer me a price if your intrested.

[d_sunnyboi]

f/s...my previous exhaust system..it's 2'' from flange to barrel(no barrel)..it was on my bone stock e15, worked extremely good with noticeable gains in power, was done by imraj and brothers...just to but it up on hangers and install your barrel.

300.00..an take it

also have a e15 5fwd box for free!!!!!..it works, no problem with shifting but was damaged due to it being run dry(cat in bag thing i got caught with). if is possible just change the damaged bearings and you have a good working 5fwd box.

[d_sunnyboi]

i buy the center console from the guy...what to use to get that paint off??..i try brake fluid but it eh work lol..i am afraid to use stripper due to it having the original leather sort of material under the paint...any advise?

[Ted_v2]

Duplicolour has a paint stripper and a upholstery paint

[d_sunnyboi]

i was checking that out..will look into if compatible..

[Ted_v2]

It has someone on the forums that has them fs

[d_sunnyboi]

driveline retailers

[desibai]

b11 club and ting yes b11 owners big in the dance got my b11 about a month now and she is my first hoping to post some pics soon once i put down some decent rims and a nice paint finish ^_^

[d_sunnyboi]

................

[black start]

^dem rims dawg, dem rims

[black start]

I have heard that the ga motr can bolt up to a e series gearbox using the ga clutch, flywheel and pp

can anyone confirm this statement and has done it locally?If so, what mods had to be done?

[Ted_v2]

Won't the gear ratio be different?

[black start]

yea the gear ratio will be different but if it could work it would be a lot cheaper to install this way

[Ted_v2]

True.

[d_sunnyboi]

b11's...fb

[black start]

I saw a 4 door hatch about a month ago. LHD lady driven, it aint look bad at all...

[d_sunnyboi]

cool!!...i seen alot but that was up in mexico when i went for holidays long time ago..they look pretty cool/normal...

[mastamind17]

could do with some assistance tuners.
My accelerator is floored and the throttle does not open all the way.
I adjusted the cable as snug as possible already and my throttle body is still not opening fully.
do I have to raise my accelerator pedal?

[Ted_v2]

A nice Gaza fix is to take a big nut and wrap the wire around it. By doing that it would tension the cable and allow the throttle to fully open. Use that as a last resort.

[black start]

you could buy a new cable for like 50-75 dollar in a parts place.

Also, the pin that pivots the accelerator usually wears after all those years of use. This causes the pedal twist when being pressed, rather than go down straight. This causes some problems with the cable as well.

Well that's one problem I had at least but mines is a ole PAM sunny.

[mastamind17]

A nice Gaza fix is to take a big nut and wrap the wire around it. By doing that it would tension the cable and allow the throttle to fully open. Use that as a last resort.

LOL dan this is the last thing I'll do if push come to shove

you could buy a new cable for like 50-75 dollar in a parts place.

Also, the pin that pivots the accelerator usually wears after all those years of use. This causes the pedal twist when being pressed, rather than go down straight. This causes some problems with the cable as well.

Well that's one problem I had at least but mines is a ole PAM sunny.

ohh yes this I realise a small play..
but my main concern:I had someone mash the accelerator all the way down and when I went looking at the throttle body in the engine bay I notice it's not going all the way back till it's stopping point.

[Ted_v2]

Yeah Daz last resort business

[black start]

^oar you not running the original motor? Well in that case you will have to work up something...

[mastamind17]

ok kool..I'll see what mods I can do to make my beyotch perform better

[want2liqur]

any fenders and front bumper for sale???

[CGN1989]

my sunny has its stock hub but recently it began shaking n I realize the hub has worn out so the bearings don't work and i cant seem to source a good hub (right side) to buy...is there any other hub that i can use instead of the b11 one...preferably one that goes on bolt for bolt...thanks

[black start]

the only other hub that can work bolt for bolt is the n12 pulsar. Lol. That's impossible to get.