SR20DE inside

dbesson · Postby **dbesson** » April 5th, 2006, 4:11 pm

fellas, who selling Autometer Shift lights, i just want the light no big stinking gauge.... none-a-dat!
who have the hock up

Postby **Dave** » April 6th, 2006, 7:37 am

u need an rpm activated device to use those unless u get a proform unit that is just a light alone with a dial to turn and say when u want the light to come on

dbesson · Postby **dbesson** » April 6th, 2006, 9:28 am

is there anywhere in trinidad that sells these?

Postby **Dave** » April 6th, 2006, 9:36 am

not too sure, most likely an import item
retails for about $65us

Bezman · Postby **Bezman** » April 6th, 2006, 9:53 am

you can ge the AUTOMETER shift light and it uses RPM 'pills' inserts - jsut insert the one you want eh light to go off at (6800 - 7000 etc)

dbesson · Postby **dbesson** » April 6th, 2006, 12:11 pm

i just want to know where & if i could get one in trinidad, a small one. i don't want everybody in trindad to see it go off

Aaron 2NR · Postby **Aaron 2NR** » April 6th, 2006, 12:16 pm

check tripple r in gulf or sheriff's on cipero street thats the only place i cud rem. seein that

dbesson · Postby **dbesson** » April 6th, 2006, 12:39 pm

cool ting meng, thanks for the help

sentraman · Postby **sentraman** » April 6th, 2006, 8:14 pm

Dam u know I used to get that idle problem where the rpm would be at flickin 2k and thing but I cannot remember the fix for that :roll:

dbesson · Postby **dbesson** » April 7th, 2006, 2:51 pm

mine isn't that bad anymore, it stays at 900 rpm. but if remember what u did i'd like to know.

would a grounding kit help with this erractic idle?

Postby **Dave** » April 7th, 2006, 2:59 pm

it may but u would be covering up a possible problem
would only be useful if u have a grounding problem

dbesson · Postby **dbesson** » April 7th, 2006, 3:08 pm

i'll wait and see how things go for now, before i go and spend more money.

R. Mutt · Postby **R. Mutt** » April 7th, 2006, 6:02 pm

Nice swap man. I'm very impressed with how clean your engine bay looks. You think you'll be staying all motor in the long term and go with the S3Rs?

dbesson · Postby **dbesson** » April 10th, 2006, 4:15 pm

thanks for the comments, i'll be staying all motor for now, just trying to save some money for my insurance which is coming up in June, after that i'll be doing a couple of small hop up, nothing to large

dbesson · Postby **dbesson** » April 18th, 2006, 11:28 am

anyone know where i could get a LSD gear box, i will be needing to get a new clutch soon, so i was thinking of getting a LSD one time. this wont be happening immediately, just wanted a general idea of how much money i will need to save and where would be a good place to get one.

Forums

SR20DE inside

Who is online