Postby Reddo! » July 12th, 2005, 10:21 pm
Ok, the question is...How to set an aem regulator when adjusting the fuel pressure to your fuel rail???Now the questioin was raised due to the fact that...we were by this man, where he removes the vaccum line from the regulator abd set the regulator at (38-39)psi, and then place back the vaccum line to the fuel regulator.
Now on the other hand...there is this next guy, that makes the adjustments without removing the vaccum line. Whats the real deal fellars...hollar back.
Reddo
"Burn rubber & not your Soul"
