Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

after servicing throttle body, idles @ 2000 rpm!

Tuning advice, problems and troubleshooting

Moderator: 3ne2nr Mods

FrankieR
Riding on 13's
Posts: 10
Joined: October 30th, 2014, 9:51 am

after servicing throttle body, idles @ 2000 rpm!

Postby FrankieR » November 10th, 2014, 10:41 am

Hello everyone, I have a 2007 corolla and it has a 1zz engine. My throttle body was all gummed up and I did a serious cleaning job on it. Now the car is idling at 2000 rpm !!!...... what can i do to lower the idle?...... is there anything i CAN do?.....

User avatar
ivar
3NE2NR is my LIFE
Posts: 706
Joined: February 17th, 2009, 3:49 pm
Location: anywhere at anytime
Contact:

Re: after servicing throttle body, idles @ 2000 rpm!

Postby ivar » November 10th, 2014, 12:42 pm

how did you clean it? Sometimes when u clean it on the car, the spray cleaner remains inside the intake manifold and causes the problem. it goes away after a short drive. that happened to me once. it may not be your case though.

User avatar
TRENDSETA
Trinituner Peong
Posts: 400
Joined: April 26th, 2005, 3:14 pm

Re: after servicing throttle body, idles @ 2000 rpm!

Postby TRENDSETA » November 10th, 2014, 1:51 pm

remove the battery pole . give it awhile then put it back on . let the ecu reset itself and "re-learn" the correct settings . may not be a spot on explanation but its worked for me

User avatar
ruff neck chicken
3NE2NR is my LIFE
Posts: 703
Joined: July 19th, 2007, 2:12 pm
Location: Behind a desk

Re: after servicing throttle body, idles @ 2000 rpm!

Postby ruff neck chicken » November 14th, 2014, 10:49 am

im not sure but doesnt that have the electronic throttle? that happens sometimes but it goes away after a drive or two. you can also just leave the battery disconnected for a bit.

User avatar
Stixer7
3NE 2NR for life
Posts: 209
Joined: July 27th, 2004, 10:29 pm
Location: A-R-I-M-A
Contact:

Re: after servicing throttle body, idles @ 2000 rpm!

Postby Stixer7 » November 17th, 2014, 12:07 am

clear the tps code

User avatar
Morpheus
TriniTuner 24-7
Posts: 10741
Joined: July 22nd, 2004, 2:24 am

Re: after servicing throttle body, idles @ 2000 rpm!

Postby Morpheus » November 17th, 2014, 12:12 am

Does it drive "normal"?

See if one of the idle ports in the TB got clogged. Should have a tiny port on the TB located on the outer side of the throttle plate. Not sure if your car is the same.

praise
Sweet on this forum
Posts: 297
Joined: February 13th, 2009, 8:06 pm
Location: Arima

Re: after servicing throttle body, idles @ 2000 rpm!

Postby praise » November 17th, 2014, 6:36 pm

Common problem with Toyota. The IAC valve got stuck while spraying TB cleaner. You need a tamper proof tool to open it and free it up.

sliderz1
TriniTuner 24-7
Posts: 7153
Joined: March 24th, 2010, 10:36 pm
Location: locating my location. brb

Re: after servicing throttle body, idles @ 2000 rpm!

Postby sliderz1 » November 28th, 2014, 12:02 pm

E-throttles would need a computer reset

Advertisement

Return to “AUTOMOTIVE TECH”

Who is online

Users browsing this forum: No registered users and 0 guests