Postby cinco » May 21st, 2010, 7:08 am
general rule of thumb there are three types of oxygen sensors
one wire 3 wire or 4 wire
for most applications any 3 wire will work with any 3 wire and 4 wire will work with any 4 wire and any one wire will work with one wire
just dont put a 3 wire where a 4 wire should be
it gets more complicated because some instances you can use a 4 wire instead of a three wire. but its too much to explain here
If DX O2 sensor wires= L touring o2 sensor then it should work
otherwise no
