roll cage options

[B18Bt]

hey guys i am in the process of building a little project and i wanted to know if i can use galvanise pipe to make a roll cage. Notting fancy like a 21 pt!

I know about chromoly but that expensive!

If the galvanise pipe cant work what other material are available to use?


thank you

[Maserati]

search the forums

http://forums.trinituner.com/forums/vie ... t=rollcage

http://forums.trinituner.com/forums/vie ... t=rollcage

[Dragist]

^^^ Dammit you beat me to eet

[bluesteel29]

http://www.mallcrawlin.com/forum/showthread.php?t=11943

[B18Bt]

thanks guys....

[sigma-turbo]

Gal pipe = no no in my books

350 grade mild steel pipe as a minimum for drag cars, 1020 grade minimum pipe for a circuit car


Have built a few roll cages so if you have any questions

oh and go buy a tube notcher, it will make your life sooooooooooo much happier

[VexXx Dogg]

do it properly and done.

Check men like Team Loco who may be able to advise on the thickness of material.

DONT use muffler pipe like certain other 'racers' in this country.

[sigma-turbo]

do it properly and done.

Check men like Team Loco who may be able to advise on the thickness of material.

DONT use muffler pipe like certain other 'racers' in this country.

in general rollcage tube/pipe is about 44mm od with a 3 - 3.2mm wall thickness for main hoops and 32mm od and 3 - 3.2 wall thickness for cross bars/intrusion bars

Molly tube is the same OD but wall thickness is around 1.5 - 2mm

[moti]

roll cage

[HaRdCoRe_YoUtH]

does any body know where i can get roll bar padding??

[sigma-turbo]

does any body know where i can get roll bar padding??

duz it need to meet any technical programs?

this stuff is the goods

http://www.jegs.com/p/JAZ-Products/JAZ- ... 0/10002/-1