NEED ADVISE
Posted: October 8th, 2020, 11:56 pm
I have a 2017 Honda Civic. I am look for a reputable and experienced alignment shop..
:HISTORY OF PROBLEM:
Recently I carried my car to service at an alignment place in conva (near to kfc). After putting the car on the lift I was told that the camber for both the rear and the front was off and in order to have it corrected I needed to purchase the a camber kit for both the front and the rear..
For the front:
https://www.proimporttuners.com/parts/2 ... r-kit.html
For the rear:
https://www.proimporttuners.com/parts/2 ... r-kit.html
So I purchased the parts online and received it..I went today to have it installed at the same place..The camber kit for the rear worked perfectly and no problems there.
However, when they went to install the front the stem on the ball joint for the one I purchased (which was recommended by the guy) was to big and couldn't fit in my spindle and nothing further was done..
I questioned how come the part you told me to order and said will work eventually didnt (also he said that he brings in those for himself but he sold out and not bringing any until next year) but he didn't give an answer..he just shrugged..
On asking what is my options are, he then proceeded to tell me that he has a set of coilovers for my car and that will solve the problem without the need for the ball balljoint replacement (he has the turbo model to mine with 20's and drop low) so I suspect he was just trying to plam off the used set the probably put in his car and changed it for whatever reason..Basically he was trying to scam me..
Now I am completely lost on what to do and how to correct the camber and alignment on my car..
Can someone point me to the right direction please?..
:HISTORY OF PROBLEM:
Recently I carried my car to service at an alignment place in conva (near to kfc). After putting the car on the lift I was told that the camber for both the rear and the front was off and in order to have it corrected I needed to purchase the a camber kit for both the front and the rear..
For the front:
https://www.proimporttuners.com/parts/2 ... r-kit.html
For the rear:
https://www.proimporttuners.com/parts/2 ... r-kit.html
So I purchased the parts online and received it..I went today to have it installed at the same place..The camber kit for the rear worked perfectly and no problems there.
However, when they went to install the front the stem on the ball joint for the one I purchased (which was recommended by the guy) was to big and couldn't fit in my spindle and nothing further was done..
I questioned how come the part you told me to order and said will work eventually didnt (also he said that he brings in those for himself but he sold out and not bringing any until next year) but he didn't give an answer..he just shrugged..
On asking what is my options are, he then proceeded to tell me that he has a set of coilovers for my car and that will solve the problem without the need for the ball balljoint replacement (he has the turbo model to mine with 20's and drop low) so I suspect he was just trying to plam off the used set the probably put in his car and changed it for whatever reason..Basically he was trying to scam me..
Now I am completely lost on what to do and how to correct the camber and alignment on my car..
Can someone point me to the right direction please?..