Page 1 of 1
help : d15b non vtec questions..
Posted: July 11th, 2012, 11:53 am
by dani22
i wanna add some more power to my d15b non vtec, and i gonna swap from auto to manual..
any specific ecu??
and what else can i do on a average budget to get some more kick???
any ideas would ne appreciated guys... thanks!
Re: help : d15b non vtec questions..
Posted: July 11th, 2012, 1:17 pm
by dutyspeed
u can get a cold air intake installed and upgrade ur exaust long tube extractors into 2'' or 2.25'' free flow
Re: help : d15b non vtec questions..
Posted: July 12th, 2012, 12:16 pm
by S_2NR
engine swap.
u not gonna get real gains on that engine, its an economy engine.
ull get small gains and make more noise.
if u still wanna go ahead: Intake, headers, exhaust. and swapping auto to manual.
Re: help : d15b non vtec questions..
Posted: July 19th, 2012, 12:01 pm
by stuntaholic
dude, if u are not upgrading exhaust keep your stock intake system and use a k&n drop in.
If you are installing an intake, use a cold air intake, the one which runs down to our bumper, upgrade exhaust piping to 2 1/2", with headers, port head.
Swapping from AT to MT - use a S40 box for ur non vtec engine do not use S20!!
stock clutch and pressure plate will b perfect.
your same ecu will be perfect, but wen ur swap i complete and u switch on the car ur check light will be on indicating a code 19 which is transmission lock up solenoid. This can b a quick fix by fooling the ECU/ECM. for more info you can reach me at 715-9043