DIY cleaning injectors
Posted: May 12th, 2011, 7:48 pm
anybody cleaning their injectors DIY
What you using ?
how you doing it?
Tools you need?
What you using ?
how you doing it?
Tools you need?
u need a tin of carb spray , 10 socket , a ole set of injector clips , and sum oil to lubricate the injector seal .
remove the 10 nuts from the rail , carefully lifting up the rail , the injectors will pop out 1 by 1 from the cylinder head , gently pull out the injectors from the rail , inspect them for tip damage or any sort of other wear , connect the ole injector clips to the injectors you have just taken out and connect it to your battery pole be careful to connect the + connection on the injector to the positive terminal on the battery , at the top of the injector there is a strainer carefully remove it and spray it with the carb spray to clean it , take the injector connected to the battery and spray carb spray into the nozzle like area u removed the strainer from , us ethe carb straw to spray them out repeat the process for the 4 injectors also you may want to spray out the injector ports with Bars spray to have them clean also ...........
this is how i clean my injectors and it works great ........ BTW a lot of mechanics do this and charge you $300 - $500 when u can do it your self .........