have ah sir ek4 b16a5 with a tranny. recently changed new thermostart new fan switch and new temp sensor. problem is my temp going up and down like there might be some air in the system
can anyone direct me as to where and how to bleed the air out of the system..
take radiator cap off, start the car, let it idle for about 1-2 mins then give it a quick jab on the pedal . that should start to push the air out the system through the open radi. now add coolant or water while idle. should be fine after...
When bleeding the system let the car idle for a while with the radiator cap of and the fan must come at lease 3 times with the heater fan on in the car. then top up with antifreeze...or water.....good luck...
