LS vtec oil supply

N1 · Postby N1 » July 11th, 2008, 12:32 pm

Where can i obtain a tee to fit in the original oil pressure unit location. Any one can help? It would be appreciated. Tee must NOT be brass though.

N1 · Postby N1 » July 11th, 2008, 1:00 pm

De Dragon · Postby **De Dragon** » July 11th, 2008, 4:01 pm

Check Trinidad Hose or any hydraulic supply place.

trincivic · Postby **trincivic** » July 12th, 2008, 3:36 pm

It will be very difficult. The original fitting is a 1/8 BSPT fitting. You should get a 1/8 NPT tap and retap then use readily available 1/8NPT union and tees

red_dragon · Postby **red_dragon** » July 13th, 2008, 12:53 pm

Trinidad hose carrying AEROQUIP FITTING little costly
but i got all mine there to run the oil line

De Dragon · Postby **De Dragon** » July 13th, 2008, 8:48 pm

If its within your budget you can try this
http://www.full-race.com/catalog/index. ... 22_716_960

red_dragon · Postby **red_dragon** » July 13th, 2008, 9:30 pm

^ actual I was goin with that but time did not permit

you are better off buying the kit if you have to but the things separate or locally it gonna cost lots more

Forums

LS vtec oil supply

LS vtec oil supply

Who is online