WTK: B18B MAP
Posted: May 15th, 2008, 3:47 pm
Can anyone tell me what pressure can an stock MAP sensor from a b18b handle?
trinituner.com
T&T's Largest Automotive Website
https://trinituner.com/v4/forums/
WTK: B18B MAP
https://trinituner.com/v4/forums/viewtopic.php?f=18&t=187332
Page 1 of 1
Posted: May 16th, 2008, 9:58 am
also, does the b18b use saturated injectors?
Posted: May 16th, 2008, 5:12 pm
saturated injectors are stock.
The map sensor itself can handle around 11 psi when used with an aftermarket piggy back to trick the ecu reading. Some sensors will trip the CEL light at 10, some at 11... depending on how accurate your boost gauge reads.
The map sensor itself can handle around 11 psi when used with an aftermarket piggy back to trick the ecu reading. Some sensors will trip the CEL light at 10, some at 11... depending on how accurate your boost gauge reads.
Posted: May 16th, 2008, 7:36 pm
Thanks