Flow
Flow
TriniTuner.com  |  Latest Event:  

Forums

95 civic ri

Fit, Civic, Integra, CR-V, Accord, Legend - Do NOT post FS or WTB here!!!

Moderator: 3ne2nr Mods

buzzie_boy
Riding on 13's
Posts: 3
Joined: November 23rd, 2007, 7:46 pm
Location: united kingdom
Contact:

95 civic ri

Postby buzzie_boy » November 23rd, 2007, 8:38 pm

hi evey 1, i my our new member today my name is buzzie. i was just surfing the neand came across this web site im from jamaica but now reside in the united kingdom . i gotta a problem . i now own this 95 civic which was imported from japan a few years back . i bought it from this dude who had'nt a clue wats wrong with ..well i know a few things about the honda cars i work on a daily basis . ive owned a few my self and still do. my lastest is a 96jdm cd5 accordvtl 2.2 sohc vtec , the other ive mention above is the 95 civic ri d15b non-vtec. this car as it happends hss a cvt tranny ( OUCH! ) sorry about the caps. it idleing very weird. from cold its a pain to get to start, it fouls up the plugs, the inside of the intake is filled with gasoline, it just wont idle on its own i have to keep pressing and depressing the accel pedal if you take your foot of the pedal the engine dies . keeping my foot on the pedal it gets going for a while at this stage it never picks up instead it ticks over poorly with the throttle fully open with rpm @ around 300 wit some luck it finally starts to rev out along with nuff smooke this is when it getting warm .ive tried all the honda tricks ive never have to deal wit this type of car before its been a challange to me os far and i wont give up ive heard mix thing abouththe tranny which im experience so of the problems mention on this site. in the uk this car is rare so can anyone shed some light on my case thank you . :?:

User avatar
SMc
punchin NOS
Posts: 3639
Joined: September 18th, 2003, 4:12 pm
Location: reading the forum rules...

Postby SMc » November 24th, 2007, 5:14 am

what part of the UK you located?

buzzie_boy
Riding on 13's
Posts: 3
Joined: November 23rd, 2007, 7:46 pm
Location: united kingdom
Contact:

Postby buzzie_boy » November 24th, 2007, 3:00 pm

im located in the city of the most rounda bouts and the concrete cow you know where that is ??? in the buckamshire area region

User avatar
SMc
punchin NOS
Posts: 3639
Joined: September 18th, 2003, 4:12 pm
Location: reading the forum rules...

Postby SMc » November 25th, 2007, 7:52 am

Milton Keynes then....damn thats far from anywhere.

buzzie_boy
Riding on 13's
Posts: 3
Joined: November 23rd, 2007, 7:46 pm
Location: united kingdom
Contact:

Postby buzzie_boy » November 27th, 2007, 8:12 am

it depends on where you are up country or london but where im am is perfect location, so where bouts you from ..matey...? no one dont know the problem im having yet ....?? or england people nuh welcome in a trini room :?

User avatar
blackcivic
Ricer
Posts: 27
Joined: June 1st, 2007, 12:58 pm
Location: north,central & south
Contact:

Postby blackcivic » December 6th, 2007, 2:03 pm

I could be wrong, but it sounds like all you need is a good tune up and service including the trottle body and injectors, also you may want to run a diagnostics on it since the car is a bit old and may have bad sensors which cause the cold start. :)

User avatar
dragaholic
Riding on 18's
Posts: 1840
Joined: April 18th, 2003, 10:58 am
Location: itchin tuh race!

Postby dragaholic » December 6th, 2007, 2:39 pm

Are you getting any codes(check engine light staying on).

buzzie_boy
Riding on 13's
Posts: 3
Joined: November 23rd, 2007, 7:46 pm
Location: united kingdom
Contact:

Postby buzzie_boy » December 6th, 2007, 3:21 pm

dragaholic wrote:Are you getting any codes(check engine light staying on).


a good tune up is prolly what i need for sure .. im not getting any codes whatsoever ...but rest assure i got it started. it turns out to be the timing was off so i just replaced the timing belt , now its just the tune up side of things .at stand still idle and park the engine tends to sort of skip a beat as if to stall which on two accasions it did .the idle speed fell well below 300 rpm . using a mac tool tacho/ timing light it was reading 750 to 760 rpm. like you say it need a tune up so i have to take it to honda for them to sort it out i guess ..
respect for the input and be blessed ...

User avatar
redsupra101
2NRholic
Posts: 1574
Joined: February 27th, 2004, 2:26 am
Location: \
Contact:

Postby redsupra101 » December 6th, 2007, 6:28 pm

if the timing jumped just like that u shud see if the tensioner is bad.

User avatar
X2
TriniTuner 24-7
Posts: 8649
Joined: April 18th, 2003, 1:54 pm
Location: 3 stories above the Batcave...

Postby X2 » December 6th, 2007, 10:32 pm

No codes ? wierd....

Could be the cam timing is off still... u sure you got the right timing belt ?

buzzie_boy
Riding on 13's
Posts: 3
Joined: November 23rd, 2007, 7:46 pm
Location: united kingdom
Contact:

Postby buzzie_boy » December 15th, 2007, 9:49 pm

sorry i aint been back to visit for a few dayz .. but i must tell ya'll that i got the car running . it turns out the timing wasnt spot on but.... theres a light on on the dash a red light- symbol showing like there heat coming off the cat . a secondary o2 densor (b'' sensor ) which is located in the cat it self . bare in mind the this 96 civic carries the 1 wire o2 sensor in the exhaust manifold as well...eh eh the manifold is also crack but i'll have to get it welded some how ....how ever i cant find the o2 sensor in the uk... so im thinking maybe you guys might be able to help me finding this sensor

User avatar
redsupra101
2NRholic
Posts: 1574
Joined: February 27th, 2004, 2:26 am
Location: \
Contact:

Postby redsupra101 » December 15th, 2007, 11:16 pm

it doesnt have to be a 'honda specific' cat sensor.
all u need is a 1 wire cat/o2 sensor thats the same threading size as your original. shouldnt be too hard to get once u look for that.

User avatar
SMc
punchin NOS
Posts: 3639
Joined: September 18th, 2003, 4:12 pm
Location: reading the forum rules...

Postby SMc » December 16th, 2007, 6:50 am

check here http://www.lambdasensor.co.uk/ they should have a bunch of universal ones, plus they are in the UK so you could call to ask them questions etc.

buzzie_boy
Riding on 13's
Posts: 3
Joined: November 23rd, 2007, 7:46 pm
Location: united kingdom
Contact:

Postby buzzie_boy » December 16th, 2007, 9:57 am

i'll try them but i doubt they can get it ...this sensor look like a needle with one wire ive seen this on the hrv, its screwed into the cat the hole is much smaller the the 02 sensor hole im sure they have the these imports in the caribbean nuff nuff

Advertisement

Return to “HONDA”

Who is online

Users browsing this forum: No registered users and 1 guest