My tweeters are 8 ohm. A lot of car audio speakers are 8 ohm also. Many 1 ohm drivers pass 8 ohms due to impedance rise during SPL comps as well. Amps will play 16 ohm too, it don't matter. Higher the impedance less power the amp delivers. Most amp manufacturers don't list 8 ohm on their site as mo...
Also notice the amp saying 2ohm as well. How exactly do i get it to 2 ohms 2nd question. How do i bridge channels. I my mind am thinking of running a 16 awg wire from the + of channel 1 to the - in channel 2 that in turn leaves the - from channel 1 and the + from channel 2 to use for the speakers.
TECHNICAL PARAMETERS Nominal Impedance 8 Ohm Minimum Impedance 6.8 Ohm AES Power Handling (1) 130 W Maximum Power Handling (2) 260 W Sensitivity (1W/1m) 95 dB Frequency Range 60รท5000 Hz Got this from the Fatial PRo site. Now i notice that it says the minimum impedance is 6.8 ohms. So would that mean...
Thanks for all the help fellas. This is what i ended up with please correct me if am wrong: Iam going to bridge channel (1-2) to get the 400rms @ 4 ohms and wire 2 fatial pro 8inch in parallel to get them on 4 ohms as well. This is going to leave me with channel 3 and 4 in which i want two run 2 bul...
also interested because the amp does not state anything about playing 8ohms. Very new to this (light reading on topic) so i understand just a little to do the setup but i want to be cautious
So i have this amp currently PowerBass ASA 600.4x and wanted to use it to push 2 FaitalPRO 8FE200 8". Is this possible. I was reading that the Faital Pro speakers are 8 ohms and 130 Rms and the amp RMS Power Rating: 4 ohms: 100 watts x 4 chan. 2 ohms: 200 watts x 4 chan. Bridged, 4 ohms: 400 wa...
Don't really have a budget. Just getting items when i have the money. Now so far i have a hifonics be 1200.1d mono block rated 800rms @ 2 ohms. I figure that should push my woofers. Not to sure if i going double or single woofer as yet but for a single woofer i was looking at rockford P3 rated at 60...
Thanks for the advice on the bass line. Now i have a powerbass asa 600.4 4 channel amp rated at 1600 watts. Now am not sure if this amp could push the mid range i wanted, something like 2 10inch faital pro 10fe-200 with tweeters or maybe i should go the 8 inch version. I wanted to fit it the back da...
Some more info. So it seem that the apron I got was for an AE103. Which does not carry the transmission mount bracket which Is needed for the Ae100. The small details that are over looked can cause the most problems. Now is just to get my money back. Would place pic for you all to see
Wanted to make this a DIY project. Really did not want to tamper with the car electrical. Out of 10 how hard would you say and tools that might be needed
Have an update. So it seems that my Rolla has one of the transmission mount bracket on the left apron so that is why the apron I bought Cannot work. To make matters worse I tried 3 other parts place and all the aprons they have don't have this mount bracket. Still attempting to look but might have t...
Looking to upgrade my music. Currently have a jvc KDR528 mp3 deck powerbass 1600 watts 4 channel amp 12 inch orion cobalt single coil 2 six inch pioneer(doors) 2 6x9 pioneer(back dash) The reason i want to upgrade is because i want to try to do it my self, increase of knowledge in this field and to ...
He said that it was a little longer than the apron that is on the car. I was under the impression that all ae1xx models could interchange. I am going to see for my self tomorrow so i would be able to give the specifics on why it not working
Pressure fellas. Bought a left apron for my ae100 and now the straightener telling me it not going to work. Thing is when I bought it from the parts ppl the man tell me it go work. I real fed up of parts dealers down here yes. Doubt I getting back my money cause by the time straightener tell me it n...
Hi guys just looking for a little info. I have the Ae100 corolla Automatic and the cluster came without a tachometer. I heard that the one with the tachometer could be used with no wiring needed was going to buy one today and the fella in the bamboo said that wiring is needed. Can someone let me kno...
:cry: ah crash my ROLLO!!!!!!. Ah feeling sick but i thanking the father for life none the less. Mostly front damage so nose cut and stuff but ah go be back in a few months. What i wanted to know is when i get it back if there is some where i could go to make sure the frame is lined up properly. Am...
:cry: ah crash my ROLLO!!!!!!. Ah feeling sick but i thanking the father for life none the less. Mostly front damage so nose cut and stuff but ah go be back in a few months. What i wanted to know is when i get it back if there is some where i could go to make sure the frame is lined up properly. Am...
:cry: ah crash my ROLLO!!!!!!. Ah feeling sick but i thanking the father for life none the less. Mostly front damage so nose cut and stuff but ah go be back in a few months. What i wanted to know is when i get it back if there is some where i could go to make sure the frame is lined up properly. Am ...
. That fly real high over my head. Need to do more reading. But concerning my configuration would it work?
lol