Forums

linker

Went to Massey and asked for gear oil for my rear diff. Gave them my vehicle number, they pulled it up on their computer. I asked does it have LSD? They said "no, standard" . I was advised to use 80W-90 for the rear diff as that is what they use. Bought 3 quarts of Genuine Nissan 80W90, we...

linker

nick639v2 wrote:I used the castrol and no problems at all. I'm about to change again at 250k and I'll use it again

Thanks nick639v2. I was worried as to what I'd do with the oil I already bought

. Will be doing my replacement tomorrow so your response helps tremendously

linker

Massey has indicated that they use Castrol Syntrax limited slip 75w-90 in the Navara D40 gearbox. This is a GL-5/MT-1 oil. The manual says to use API GL-4. Manual Transmission: Grade API-GL4. Viscosity 75W-85 or 75W-90. Change interval 30000 kms. Volume required 2WD: 3.99 L; 4WD: 4.32 L Does anyone ...

linker

Brake and Clutch Fluid : Grade DOT 3 or 4. Change interval 1 year or 20000 kms How much is recommended to buy to do a flush? Power Steering fluid : Grade Genuine Nissan PSF or Dexron 3 ATF. Change interval 30000 kms Anyone ever replaced the power steering fluid on the D40? how much is needed to do ...

linker

^^^^^^ Thanks for the heads up nick639v2 I will definitely be looking at including this as preventative maintenance

linker

Just heard a squeal the evening before. Thought the belt had to change. Send my wife with the van to go Massy to buy it the next day . Just before reaching Massy ac cut off. When she checked belt burst and pulley dropped out... Pressure.. Seems that pulley and belts may have to change at 100k I ass...

linker

Excellent thread. I've read through and learned a lot. Need a little assistance folks. Does anyone know how to replace the high mount stop light bulbs on the 2013 Navara 4x4 LE? I don't see anywhere on the inside headliner to access any nuts to release the high mount stop light assembly. I'm wonder...

linker

Ended up dropping the headliner to get access to the bulb from inside the cab. Quite cumbersome just to replace a bulb.

linker

Need a little assistance folks. Does anyone know how to replace the high mount stop light bulbs on the 2013 Navara 4x4 LE? I don't see anywhere on the inside headliner to access any nuts to release the high mount stop light assembly. I'm wondering if the lights even ever worked. I'm the second owner...

linker

Excellent thread. I've read through and learned a lot. Need a little assistance folks. Does anyone know how to replace the high mount stop light bulbs on the 2013 Navara 4x4 LE? I don't see anywhere on the inside headliner to access any nuts to release the high mount stop light assembly. I'm wonderi...

linker

Try cleaning the MAF sensor and the throttle body. If the MAF is dirty, then it does not sense the correct amount of air flow. I had a similar issue and solved it by cleaning the MAF sensor. It was confirmed when checked the Short Term Fuel Trim and the O2 sensor voltage at WOT. A can of MAF Sensor ...

linker

NorStar2K wrote:People, Sando is the best place to transfer. In and out in less than one hour.

That could never happen in POS.

+1!!
Transfer took about an hour and went back 7 days later and got my certified copy.

linker

Anyone, how much does an nze or zze corolla weigh? Looked for this info online but not getting it anywhere.

linker

i believe that Nikko are good replacements.... avoid OE brand as "praise" said.. changed mine at Federal in Marabella... you can give them a call and compare prices with other suppliers.. to get out of the axle you will need to cut..

linker

Does it make any sense installing an underdrive crank pulley and lightweight alternator pulley on a 3zz-fe? Is there any adverse effect to the engine by using an UD crank pulley? i have seen these installed on the US 1zz-fe like wow, but have not been able to come across anyone complaining about it....

linker

Give ryanair at trincity a call. You should find the number in the phonebook. Theya re a bit pricey though so call for a price. They know what they are doing but if it is just a gas up you looking for then you can ask around for a best price.

linker

Tein warns about counterfeit springs. They even have a page on it on their website. The part number for the corolla is SKL00-AUB00. They say imitation is the highest form of flattery but it is ok, we do not want imitation suspension parts on our cars. Please tuners, do research before spending your ...

linker

These springs come with rubber tubing to take care of this. mine made similar noise for a couple of days but once settled the noise was no more. Leave as is, if you getting noise after a week or two then jack up the car and ensure that the rubber is there or that it was not shifted during install.

linker

Can anyone tell me whether the front and rear sway bars for the US corolla will work on the ZZE12* corollas? that is, the RORO 1.6 corollas?

Also, can anyone tell me whether the Altis chassis is the same as the US corolla? Are there major differences between the Altis and the ZZE/NZE chassis?

linker

Once i am getting the transmission with the 1zz, should not be a problem right?

linker

Hi Guys, Looking to swap out my 3zz for a 1zz. Can you tell me whether the harness from the 3zz will work on the 1zz? i am thinking that it should work, but i just need confirmation. Also, if anyone has done this swap, please let me know. Will this be a simple swap? That is, 3zz out -> 1zz in??? Muc...

linker

Took the car for a run just now. Still shifting into 4th at 140 kmph when floored from a dead stop. Can you guys tell me at what speed you your 3zz goes into 4th? Does not seem to be the cable as I had no issues just now. Checked the diagnostics with my Greddy informeter and it was fine. Will carry ...

linker

Driving early this morning the car shifted into OverDrive 10Km/h later than usual (OD usually at 130KM/h but this time it changed to 4th gear at 140Km/h). I shrugged this off and wanted to see if it would occur again. So at the next traffic light, when it was safe to proceed (green light and no vehi...

linker

Wheel bearing. The sound you described indiccates the bearing going. Soon you will be hearing that sound while driving normally. As for the bent wheel, jack up the car and ensure that you wheel nuts are tightened and that is no play on the hub. I suggest removing the wheel and checking that the nut ...

linker

Changed the CV joing today. When hammered, the joint disassembles but the inner part remains on the shaft (due to the snap ring in the groove). This was removed by cutting. If you need to ever change just the boot, remove the entire shaft and replace from the inner end and not the outer. Btw, this w...

linker

got this on soft copy....

linker

Fellas help me please.. i need to get the Left Side front Drive shaft assembly for the ZZE corolla. Can anyone suggest where i can get this to buy?? if anyone knows of someone in the bamboo that has this please let me know. it would be greatly appreciated...

linker

mirror glass is about $300 at TTTL.

linker

last time i checked it was $2700 over at TTTL... this was a couple of years ago.. and this is not the automatic retractable one eh.... so be prepared to pay more for that one... check bamboo... Bobbys or M&N.. you shud get it there for less than a grand... well providing prices did not go up in the ...

linker

i think he meant the 1.6 from the nze cus there is no 1nze either its the 1nz-fe. To answer your question. The 1zz would be the best bet. there is a good bit of aftermarket support in the us and it realy is the most powerful of the 3 options and has great gas milage and well obviously its a 1.8 so ...