Forums

blacklancer

I need some help i bought a 2008 l200 auto 4wd sportero but the diff was changed by last owner the label on the diff is damaged it starts with a 4 and ends with a 0 any one have the correct ratio front amd back for this set up.

blacklancer

I got a 2008 l200 sportero a week ago. I tried to use the 4x4 and front wheels seem to be draging and not rotateing properly van would roll2 feet and lockup. Mech said the diff was changed and the ratios are off. Anyone ever evperience this.

blacklancer

I recently bought a KZJ95 prado with a 1kz engine working great. only missing the drivers side door visor anyone know where i can get this. I am using amsol full syn. oil and original filter.

blacklancer

Anyone needing parts or a door for the sylphy drivers side I have one minus glass and mirror.
389-6690

blacklancer

This issue with the dash was rectified with the 2008 moďel onwàrds.

blacklancer

Street Racer 7 wrote:hey . my headlamps tends to get moisture in them...do u know any body who can fix the problem

Same issue I have, temporary fix Disconnect remove the bulb assembly and use a vacuum blower side to evaporate moisture , it worked for me.

blacklancer

[quote="haterforever"]Guys, I brought down a F/U 2009 bluebird sylphy last month and i'm preparing for the first maintenance. Any advice on what to do, check for? Also, what is the best engine oil and transmission oil to use (CVT)?[/quote Engine oil is optional I use shell h7 and Nissan oi...

blacklancer

Biggs3ne wrote:I know of all the 'tricks' you guys speak of, but I'm not prepared to pay for a costly mistake...I give electronicall y controlled parts the respect they deserve..

X2

blacklancer

If the car idles high after a diy tb cleaning simply disconnect the +ve batt terminal for 60 seconds and reconnect. Of course clock and stereo preferences will have to be reset (no scan tool needed for that). Oldest trick in the book, right after hitting it. This could be done but the deck an navig...

blacklancer

That's nice but if you turn the ignition on and press the accelerator pedal the butterfly will open allowing you to clean the throttle body. If this isn't enough you can also remove the throttle body and clean from either side all without having to use a scan tool in order to do the idle relearn. I...

blacklancer

Why can't you clean your tb yourself? The Trottle body in the Sylphy is electronic or E-Trottle as it is commonly called there are no manual adjustments on it, therefore when its scrapped and cleaned or the flap is moved if you try to clean it with a rag it has to be idled back to specs with a diag...

blacklancer

Have some parts for the drivers side front door and a door shell if anyone interested.No side mirror or door glass I have the cover for the side mirror (white)

blacklancer

Saw this issue highlighted on one of the nissan forums online a while back, I will try an locate it to see if they have a solution to the issue.

blacklancer

215/45/17 works great w/o affecting ride quality and no touching on fender.

blacklancer

"Biggs 3ne" I have noticed that I have to add oil between oil changes with the sylphy never had this issue with my other cars.

blacklancer

innovative audio wrote:Royal purple jus sayin

Great choice if you want to change every 10,000k

blacklancer

Guys if you are using Shell Helix H7 (blue bottle) change you oil every 5,000km and not 10,000km as I see some are doing, You don,t want to face the bamboo for an MR20 before your time. Maintain it and it will last.

blacklancer

Padna quick serv sando/ massy serv Its better u go by the pro because if u clean throttle body or injector u have to recalibrate the learn (idle volume learn. Or an when you guys changing your coolant change your thermostat an coolant temperature sensor as well. Excellent advice and very accurate, ...

blacklancer

From quarter tank usually about 90 to 100 super to fill up. never really checked how many km i get but will do this week and let you know.

blacklancer

Important thing to check is the chassis model eg. KG11 another would be engine type HR15 or MR20 if they are the same then info on manual should be the same except for minor differences,

blacklancer

Leave carnival. Inform ppl of the risks and whoever still taking the risk of getting Ebola Trinidad will be better off without them tbh. Think about it..less idiot drivers, less bandits, less guntas, guntresses etc. This is an ignorant statement..... I'm not sure if they should stop or not stop Car...

blacklancer

Also depends on race, some people may want to bury their head in the sand on this issue but it is fact.And also most police officers are incapable of carrying on a logical conversation for too long. To answer the op question the police don't have to have the say on who is right and wrong their stupi...

blacklancer

This country really is a joke- trinidad needs to join the list of Caribbean nations that are looking to BAN any flights from Ebola stricken parts of the world- a decision like this should be made by the population and not by a few idiotic government officials . This should not be allowed to happen ...

blacklancer

Ministry Of health and Jackass Fuad Khan are no way ready for ebola, cnn at 6.30pm just reported the Texas nurse infected with ebola traveled to see her mother and boyfriend while having a fever on a commercial airline. The airline and the CDC are now trying to contact passengers who were on the pla...

blacklancer

I have noticed that some of the suspension bolts and the caliper pins are soft and easily rounded out, anyone had this issue. Yea a guy in debe redo mines for me he rebush it with teflon the caliper bolts tends to make noise aftwr a wile $180.00 to rebush it. He did the wifey sylphy Call raj from d...

blacklancer

I have noticed that some of the suspension bolts and the caliper pins are soft and easily rounded out, anyone had this issue.

blacklancer

BRZ wrote:I betcha if a minister were to contract Ebola they would fly them out quick quick to a country that can deal with them!

X2

blacklancer

what's up fellow Slyphy owners I'm looking for the OEM rims for this vehile (slyphy that is). Does anyone know of someone who has or where I can get them? Thank You (P.S contact info 743-4424 CALL, TEXT, VOICEMAIL your assistance is greatly appreciated) Check Shopboy on the forum he had a set recen...

blacklancer

Are we in Trinidad truly ready to deal with this Virus, keeping in mind that people with dengue are still suffering at our nations hospitals and basic health care is still falling short. Is there any plan in place, our health minister says we are ready and there are things in place, are we going to ...

blacklancer

vidish wrote:Went and hooked it up to machine.. guy said he has to reset some code or something. Working normal now.. but thanks for the feedback. .

I am glad that you got through, but i am now curious to know what code and for what reason anything would have to be reset since it is only plugs you changed.