Forums

Yeah Masta1 I have updated my graphics card drivers and that worked for me but I'm on amd cards don't know if that will work for you but you can try please remove old drivers first then install I use driver Fusion to completely remove ole drivers

Hey Masta1 I have the same problem haven't found a fix a yet but will forward any info that will help asap

Prototype it have a few things you have to consider before yuh upgrade yuh card 1 power supply 2 board specs meaning if pcie gen3 can work and 4 and most important what resolution you would be playing at, if it is low meaning under 1080p ,gtx680 ,titan and 7970 is a waste of money and you would not ...

yo if you dose use MSI Afterburner software unlock the voltage any where between 1.100v and 1.138v some times these cards need more power to maintain reliability and be stable. Might have to change the thermal paste on d card also to bring back down them temps, set fan to 75 or 80% depending on idle...

Hey Ronaldo i suggest u back off on that vcore asap. in X58 you use qpi vcore with in specs to get a stable OC most likely for that OC the cpu vcore should be around 1.35 - 1.42v max and 1.42v is extreme

Use cpu-z to find the ram timing and set it accordingly with the rite voltage to go with it ckeck SPD in cpu-z also set the command rate to 1 if not specified most likely the ram timing will be 9,9,9,24 with command rate 1

Use cpu-z to find the ram timing and set it accordingly with the rite voltage to go with it ckeck SPD in cpu-z also set the command rate to 1 if not specified most likely the ram timing will be 9,9,9,24 with command rate 1

Use cpu-z to find the ram timing and set it accordingly with the rite voltage to go with it ckeck SPD in cpu-z also set the command rate to 1 if not specified most likely the ram timing will be 9,9,9,24 with command rate 1

What is the ram speed currently? you can try 21 for cpu multiplier

Ronaldo try flashing to the latest bios first and x58 is tripple channel, so that 16 gigs if not in the right dimms will be a problem also that board might be rated to work at 1600Mhz memory speed so lower your multipliers to 2:8 or 2:10 and overclock form there.

Hey just trying to get an idea of what the problem might be? do you use software like afterburner to control fan settings and overclocking.Is both cards clocked the same if not use afterburner to set both cards to the same clocks and memory

The cheapest way out is to buy a tig rig and use with that machine u presently have, u would have to get a cylinder of argon tig works with straight polarity and set the machine to dc and u good to go.If u want to go this way I can link a used rig for $1500

Most likely driver issues might have to revert back to older drivers for that game.I have the same issue with a gtx 470 but not in gaming from cold boot that exact same thing happens

buddy give us yuh system specs and power supply rating, the problem can be from a number of different things also if the system is overclocked,more details needed to pinpoint problem.

most motherboards which use real tech sound drivers have compatibility issues with nvidia HD sound drivers one has to be disabled also i have 2 460 in sli overclocked 270.61driver works fine 275.33 I get artifacts

The reality of your situation is that you did'ent even consider your monitor,at full a radeon 48xtwo can pull up to 400+ watts and this is just the card if the processor is overclocked at full load that tower may be pullin close to700 watts the size of the monitor also plays a roll.So if its just a ...