Forums

karlos

Ya bud I hope someone chime in and shed some light .... I'd keep an eye out for a 1st gen for you if you like but a good shell registered won't be around 20 or so but I'd try

karlos

I've heard for the hilux surf ( 4runner) but as with any project I'm looking for a reasonably priced option unless I get a Hilux rear end at a good price

karlos

I'm currently doing a restoration on a series 1 rx7 and man it's a lot of money but I love this car ( I haven't driven it yet ) but the appearance and of course it being rotary .... With that being said I'm still in the building process and I'd like ideas from you guys ( if you don't mind) on a LSD ...

karlos

Maztune

karlos

Be veryyyyy careful with this as I heard the older model gearbox was a very light oil so refer to your service manual for the information you're looking for

karlos

My neighbor had the same problem , don't quote me on it but I believe he said there was a glow plug rail fuse close to the battery that was blown and caused the problem

karlos

Yes it is , also if I go onto the highway keeping it at around 2,000rpm in fifth temps will start rising

karlos

Good day fellow tuners I have a k74t and I'm experiencing an overheat when I turn on the ac , new clutch fan, water pump and radiator shroud is on but thermostat is out and the top hose gets hard but I don't lose any water nor does it bubble . Head shaved and replaced gasket this year as well as rad...

karlos

hey good day tuners i'd like whatever advice/help can be offer to me with regards to an overheating problem i'm getting with a k74t ... top hose gets very hard even when parked up overnight it has pressure in the radiator next morning ... no water being lost nor any bubbles (no thermostat) Today i r...

karlos

Stock suppose to be 58" and hilux is 58.5"
Never saw any rx3 locally would love to see it

karlos

What oil are you using ?

karlos

the tomei dealer by chance is on tuner? yaa those kempower are insanely expensive i saw a dyno sheet for the tomei camshafts and the results didnt seem too bad http://www.tomeipowered.com/BTE/index.p ... uki-swift/

karlos

Any one ever research Kempower camshafts? also tomei poncamshafts? if so whats you review on them and what do you think has the best potential output power.

karlos

anyone know where i can find an oil pump replacement for my suzuki swift sports?

karlos

can someone link me to a good source for the workshop manual am not getting through with the above

karlos

i would like to know if the internals such as pistons conrod and crankshaft is the same on the liana m16a non vvt engine and the suzuki swift sport m16a VVT model .
Thanks

karlos

good day tuners i am looking for a pair of old school 13b non turbo housing .

karlos

i am with colfire price isnt bad considering that i am 19 and i drive a pickup . but i have defensive driving certificate so that helps a bit with the cost

karlos

its the pump causing that . also if you havent cleaned the mesh type filter for a while you should get it cleaned

karlos

i know the line from the tappet pan cover can cause the situation your seeing .

karlos

use to use that shell oil to me its a big waste of money/ engine started burning oil and am talking about a engine thats not doing plenty kilos. i use NP 15w40 now the best i have used so far i stopped losing oil engine got quiet and to me i felt like i got a better throttle response . by the way th...

karlos

gas shocks? wont it ride hard? also was just thinking . will the 4x4 model torsion bar be stiffer?

karlos

someone has a dd3512 on the forum for 2200 bro

karlos

i use NP 15w 40 currently hitting 224,6** and runs great np at all no smoking no laziness . person i bought it from used NP also and am the second owner TCA series

karlos

hey guys recently bought a 2.5l frontier and as almost every owner who has a frontier is annoyed by the bouncing . what can be done to reduce this boucing ?

karlos

hey guys recently bought a 2.5l frontier and as almost every owner who has a frontier is annoyed by the bouncing . what can be done to reduce this boucing ?

karlos

ok tuners good day i not experience in the car audio, so i'd like to ask advice on t line box which i've seen. it really impressed me and i would like to know who is capable of building such a box for a 6'' sw6.5 dd's subwoofer. as i say tuners i am not a car audio guy but some advice will be greatl...

karlos

saw someone had bad review about mileage mack , had one transaction with south branch was rather pleased with the work . bought toyos 265/70/r15 for b2500 pickup rides really nice . guys in there treated me real good even got my tire shine on my tires o.O

karlos

wtk whats the cost and fabrication involved in installing an aftermarket intercooler(piping, reducers, intercooler)

karlos

i would like to know whats the size of the b2500 turbo on both cool and hot side of the turbo . anyone have any idea?

Forums

Search found 80 matches

Re: Prologue to a Build

Re: Prologue to a Build

Re: Prologue to a Build

Re: LF: Rx7 2nd gen power steering rack

Re: Gearoil

Re: Sportero Hard Start....Advice Needed!!

Re: TECH Thread - MITSUBISHI L200, Sportero, Triton.

Re: TECH Thread - MITSUBISHI L200, Sportero, Triton.

Re: L200 owners........what are your experiences???

Re: My First Generation RX7 Project

Re: 400,000 kms

Re: m15a, m16a camshafts

Re: m15a, m16a camshafts

Re: Anything SUZUKI........

Re: Suzuki Swift Sport M16A Workshop Manual

WTK m16a info

LF 13b housing

Re: Help with Insurance Premiums.

Re: ranger missing on incline

Re: Turbo Leaking Oil

Re: BT-50 OIL Change

Re: WTK Frontier

Re: WTK RE SX 15" OR DD 3512

Re: What oil do you use in your D22 frontier YD25???

WTK Frontier

WTK Frontier

LF experience box builder

Re: Recomendations for 4x4 tyres

WTK mazda b2500

WTK b2500