Forums

katana

the only help i could give you is a name, i aint have a number for him again. i could give you directions if yah need fella name is tony - maloney come in from the highway- drive down- see the new facility they build on the right side - turn in there- drive again straight down- you will see a "T" ju...

katana

LEV - 1.5 NON VTEC - MANUAL noticing that when i kick down the car reaches about 4-5 K RPM then it gives a nice kick like something was blocking and then it get loose. Sometimes, the car takes off nice and sometimes i get this. GAS ON THE CAR IS A KILLER AS WELL. MODIFICATIONS - 4-2-1 and Short intake

katana

if yuh have one then dont sell it, unless yuh under real pressure for money. making them brackets aint so easy. it does have to line up properly

katana

hey,

need to change bushings both back and front and some other suspension stuff. i also need an overall integrity check on the entire suspension etc.

any ideas on who i might be able to carry the car by and ensure that i get a good level of service?.

katana

when i did my conversion i had the same issue. i think i called Auto nation and they said they had it but not in stock. i ended up making TWO, the side one and the back

katana

ill tell yah honestly,

is only about ah month after i put on them rims i notice it. before that with meh buscuit tyres it was fine and used to drive sweet....

katana

yeah, my ek3 cvt was giving that problem a few mnths after i bought it. i not too sure if it could have been fixed, but i changed the oil a few times and put in honda cvt plus recalibrate. that actually work for a while then it came back, did it a few times and i just couldnt fix it. they told me th...

katana

thanks a lot for the info,

is there anyone i can go to to get the issues resolved

katana

Got it, ill check for that this evening, not to change the subject, but ive been asking about this for a while. namely, the car seems to be really sensitive to bumps in the road. any wavy road, and i gotta hold my steering for dear life, otherwise, i can take a turn for the worse. checked it out a f...

katana

spyro,

yeah boy , we aint even get to make a las lime, say wha we could still organise.

yeah ran the fan direct and the car was fine, bought the fan switch and the car working good now.

katana

got it,

ill go get a a swtich, on how do you bleed the system?...

katana

nicely, most ppl telling me it is most likey that, last question, i suppose i can run the fan direct, and see if that changes anything. ill just carry it by a mechanic. off the top of your head, whats the cost for a thermo switch, and that the sensor atop the thermostat housing we are talking about ...

katana

yeah i did put it in myself, dont think it can be incorrectly placed, made sure to look, plus it can, from what i can see, go in one way only. the rubber seal, also has grooves that match up to the housing making it a one time install. i didnt flush or bleed anything. i drained the radiator, filled ...

katana

car overheating, actually guage reaching 3/4 then coming backdown to normal. smelling the heat, and it seeems as though the water overflowing a little cause i seeing the water marks. i replaced the thermostat three days ago, run the car all over the place, and was working fine, this morning, in rain...

katana

that was my issue since i bought my ek3. tranny was vibrating plenty. changed fluid and it help. (original honda fluif). then started happening after a few months again. changed again, and "recalibrated". worked fora while. then started happening again. then started slipping all togther and then wen...

katana

mine went through more or less smoothly, note: mine is a LEV 1.5 non-vtec with CVT tranny. mounting brackets for mine was wrong so i had to replace. the bracket that connects under the box was found in the bamboo. the one to the back and the top had to be made. (that was the most time consuming) i u...

katana

i personally beleive in them ghost thing now. before, i never did but strange things happen to me, up to this day i saying we hatta bless the house. as for the "hold down" thing, i aint beleive is ghost at all. why i say that, cause it used to happen to me plenty. i had it bad one week, where i used...

katana

well, lets trade guages cause mine will read perfect when full, but go below "E" after 2 trips to town and back

katana

Fellaz, here is a link for any bikemen looking for service manuals...

http://www.themotorhead.com/downloads/

good stuff

katana

serious?..............hum...

katana

actually, the 02 sensor went bad about a 7 mths ago. the engine check light simply came on. i went by a mechanic, he put ah paper clip and check the lights for the code. then he identified the top sensor as being bad. now the is still when i had the cvt tranny. it used to burn gas but not as much no...

katana

nah mine is a white

katana

well, i forgot to metion one main thing. my 02 sensor bad for a good few months now...but still, with the tranny it used to never bun sooo much. now i studying, since i controlling the gas kinda with the gear box, i now probably seeing why i should replace the 02.......ill change it, finally, and se...

katana

yeah premium.............the gas finishing real fas now....

katana

yeah, the car idling like how it used to. no problems....the only thing that bothering meh is that gas..

katana

nope..didnt change that..no need to. im carrying the car again by the electrician. he said he disconnected something and thats why the abs is coming on. also, i was missing the reverse unit for the box..he is going to organise that for me as well. and finally, he said that the shifter may be a littl...

katana

didnt have to get a manual ecu after all... well, at least to start and drive the car. i suppose for correct performance i may need to but for now the car working good.. had to remove the brain box for the tranny and then jumper some thing on the next brain box. for future information (since i catch...

katana

Question, have a d15b non-vtec and putting in a gearbox (s40). car is an ek3 99 with CVT. we put the box but having a little issue with the ECU. car starts but D light flashes and then car cuts off. it looking for the tranny im guessing. can anyone help by telling me how i can bridge the stock ECU t...

katana

that bolt is the one yuh does have to break when yuh changing timin belt right?...my 99 lev have the same issue. the bolt aint breaking for nutting and i have to change meh belt. they say it does have loctite on it so it does come like yuh weld on the bolt...plus..i think is clockwise yuh does have ...

katana

great great advice fellaz..thanks a lot..end ah month carrying it autonation and organise everything..........they does fix bike too..hehehe......meh carbs giving some trouble...

Forums

Search found 34 matches

Speed limited

suspension

overheating

MOTORCYCLE SERIVCE MANUALS

EK3 cvt to manual converted