Forums

xNeXuSx

anybody know what is the factory camber/alignment settings for the 2006/7 mazda3? Hmm. This isn't something you see getting asked very often. Made me think back to when I messed with mine. Anyway, with a full tank your front should be (-)0.57 and rear at (-)1.42. Caster and toe-in also? anybody kno...

xNeXuSx

Yes, I am.

xNeXuSx

Upper control arm: BBM228C10 (schematic 282A0)
Lower control arm: BBM228300D (schematic 28300A)

xNeXuSx

Try one of the businesses mentioned in the first post of this page by NR8. If that fails, call 662-0374 and/or 645-9800. You could also try SS.

xNeXuSx

Yup. That price is for AirREX or KSport? You need new rear lower control arms for air ride too. Included with some of the kits tho. I'll PM you.

xNeXuSx

Hey good afternoon fellas anyone know where I can get coil overs for the 1st or the 2nd Gen mazda 3 What's your budget? You can get a cheap set for as low as $375USD, although I don't recommend them since they're not rebuildable and are generally poor (I won't even name the brand), or a set of KW C...

xNeXuSx

Limiter/Fuel cut. Your throttle body may be closing when you hit a predetermined speed. Never had this issue, but I don't go that fast very often. You can look into ECU flashing, but I don't know if it's possible with this car. Check out a piggyback like Unichip; costs around $400USD and you will ne...

xNeXuSx

trinimotors wrote:Bought the filters on amazon and changed it my self, it was easy and took less than 30 mins.

Really? What's your model YOM?

xNeXuSx

That's right DVSTT. The lower canards are pretty much universal. The mid bumper are also? Since pimp called them "fins" that's what came to mind.

xNeXuSx

pimp wrote:WTB: mazda 3 bumper fins...
any1 know where i can purchase a set locally?

You mean canards? Never seen them locally. Even with all the mods on my car I never considered these. Not convinced that they suit the car at all. If you do find some and install, it would be interesting to see how they look.

xNeXuSx

pimp wrote:
telfer wrote:Mazda 3 tail lights PCD model where can I get these ....cheap

x2

Dollar Savers

xNeXuSx

All MZ3 models up to 2009 take 4.25 quarts guys.

xNeXuSx

I'm getting a very bad vibration on my pedals when i pull off but stops when I pick up speed. I changed cradle bushing, speed balance the tires an none helped. Can anyone help with this. 07 mazda 3 You feel no vibration from the steering wheel? Check engine mounts and everything belt driven, make s...

xNeXuSx

pimp wrote:any1 know where i can get a pair of eyelids 4 a 2005 mazda 3?
locally any1 hav any 4 sale?

I imported mine from Nextmod. Really not sure if or where you can get them locally.

xNeXuSx

When last you clean your MAF and Throttle Body? Also yes your battery could be at fault so if you could swap it, it would help eliminate that if it is not the issue. throttle body and MAF was serviced over 2 months ago by the same mechanic.. after two days of running the car with the same starting ...

xNeXuSx

dredman1...They will be looking at the registration date, not the manufacture date. Have a look at the date and calculate, because PCN could fall under 2-5 years or 5-7 years depending on the date of registration and those are $4500.00 and $3000.00 respectively.

xNeXuSx

tuners, what is the cost to transfer a 2005 mazda 3? PBU series... well its 9 years, shudnt be much...looking to sell mines also, same year, so i would also like to know Falls in 7-10 year category...so $1350.00. Hi Guys - Have a PCE Mazda 3 doing about 70,000 km - company car. Apparently the oil f...

xNeXuSx

Now all the lights coming on. As I turn the key ignition on the "ON" position without starting and when I actually start it disappears any one had this problem I'm guessing it could be a failing alternator? This is normal. As for the rest, you could probably get enough help here to solve ...

xNeXuSx

bt50 wrote:Guys looking for the MC for the mazda 3 PCH series. Southern sales dont have any in stock. Any suggestions. Thanks

I have a 2007 OEM brake master cylinder. If you're still looking for one PM me.

xNeXuSx

Lowbeam = H7
Highbeam = HB3 or 9005
Fogs = H11

xNeXuSx

Guys I'm looking for a 2006 Mazda 3 right side mirror. Powered. Any suggestions where I can get it? My Mirror has the adjustment when car on reverse also. (But don't really need to get that again). Thanks. RockAuto, that's where I got mine when my driver's side broke. Locally, check with M&N's ...

xNeXuSx

I have been asking a long time for prices and where can I find a camber kit. When I do get and decide to sell, all of a sudden men knows the prices for them... Smh.. Tim85 didn't I send you a PM a while back mentioning Eibach/SPC and Dominant Engineering camber arms? It was right around the time I ...

xNeXuSx

Mazda 3 rear camber kit for Sale. $2000 ImageUploadedByTriniTuner1406485092.840341.jpg Call 788-9686 or PM me Ok, I'm not bashing here, so don't freak out. 1. As mentioned, these arms are totally unnecessary...UNLESS you plan to lower your car 3-5 inches via coilovers. Excessive negative camber wou...

xNeXuSx

Yuuup. Changing that evap is a PITA!! Get second and third opinions, if necessary.

xNeXuSx

WTB - EK4 automatic transmission axle for B16A5. Complete, including inner cups. Left & Right.

xNeXuSx

They are not the same.

xNeXuSx

The replacement parts you listed should be fine. Have a look at your existing oil pump as well to see if there is any unusual wear. I'd invest in one just for peace of mind. My mechanic advised this as well, so I got a new one. If the car was untuned then its normal for your IAM to be lower than 1 ...

xNeXuSx

@legacyspecb - Forgot to mention, the IAM was 0.5 and TCU has been reset.

xNeXuSx

Well the car is in the shop now. Valve stem seals were bad also, so a little oil was getting through and causing smoke when engine is cold. Pistons were fine and the block seems ok. I will find out tomorrow if it needs shaving so I can't pull the trigger on getting pistons yet. Going with new bearin...

xNeXuSx

TCU is adaptive...so maybe the previous owner used to floor the car when the block was cold and the trans adapted by increasing line pressure..so now you would be experiencing these effects which may be undone by a simple reset of the learnt parameters All in all you shouldn't worry much..get the v...