Forums

No, boxing board is very soft wood, most of the time its hog plum trees...and its usually wet as once it dries its easily deformed and not sturdy at all You can look into construction ply or galvanize for a temp shed Even with ply isn’t there more than one type ? Construction and another one I beli...

Rovin wrote:for outdoor wood projects they have d artificial composite wood plank "boards" selling too ... kelvin ghany

Thanks, yes I never looked at the price of those, will do it now.

Thank you all! Lumber prices are crazy right now that's why I was looking at the boxing board. I will do a little drawing and then price it in a few ways to make it as cheapo as possible...

Good Evening! Once again I come to you with a non-tool question where google didn't help me much. What exactly is boxing board? Can I use it to build a temporary shed that would be sitting sheltered under a galvanized roof? Instead of buying 2x4s in Bagwang. The other project I would use it for is a...

Yeah I might just do that. The only place I found wants to charge me for the recycling and I am too poor at the moment to pay for something like that... Still getting a quote though as I am curious.

Hey guys, this not strictly a tool question but do you know of a place that collects e-wast in Trinidad? I have a big chunky Epson printer/scanner and an air fryer that I can't be bothered trying to fix anymore but I dont want to simply chuck them in the bin? Is there a place or person who could mak...

Guys I am looking for 1/2" or 3/4" inch boards for tabletops. What is my cheapest option? Ideally, it should be able to take some water but I can also cover it with cheap vinyl or similar.

Nice, thank you!

Went by the Total store to buy the Total orbital sander and the price was $450.To my surprise,they also had the SKIL orbital sander at $595.The Milwaukee for $670 was out of stock and Laughlin had it for $800.I ended up getting the same Milwaukee from someone brand new with the combo for $600 so I ...

I have a cheap (Harbor Freight) electric spray gun for a couple years now and only now decide to try it out The instructions are calling for a few drops of 'air gun oil' in two spots before use Does anyone have an idea of what exactly 'air gun oil' is, and where I can find it? Air tool oil. I use m...

Rovin wrote:^^^ idrees marketing in freeport , i bought some there like that a few mths ago ....

Nice, thank you! I see they have a showroom on the Avenue.

It also looks like they run a next cheap line of tools: Fixtec

G' Evening folks!

I was wondering if anyone sells handrail brackets like this in Trinidad?
Can't recall seeing any, although I never really looked.

What's a good wood to use for a pool decking.. Looking to do this exact format Screenshot_20210627_123005_com.google.android.youtube.jpegScreenshot_20210627_122908_com.google.android.youtube.jpeg I dont know how the price compares but one option to look at is composite like this: http://www.thebuil...

Very neat design and execution bro! Also thanks for the review, I was looking at these Total tools for some time now. Total mitre saw for 1k, Whats you guys' thoughts? Purchased the 8" version last December. I must say I am astonished at its performance. Got it on special for $900 at a hardware...

Sad day in the shop, my spirit level fell off my workbench and broke clear through... :/
Shopping for new ones now.

Cooper wrote:Try Montrose Electronics. I got a replacement thermal fuse for a Nuwave oven there.

Nice, thank you, i will give them a call.

pugboy wrote:i have, sent you a pm back then

Nothing ever came

Will get back to you Sorry this is not strictly speaking a tool query but I am looking for a Thermal Fuse (to be used in an Air Fryer) 172C cutoff, 110 V like this: https://www.amazon.com/dp/B07K38Z8JR/?coliid=I103711F3F23P4&colid=2E245O0AGVJ8C&psc=1&ref_=lv_ov_lig_dp_it Who would carry...

Sorry this is not strictly speaking a tool query but I am looking for a Thermal Fuse (to be used in an Air Fryer)
172C cutoff, 110 V like this: https://www.amazon.com/dp/B07K38Z8JR/?c ... _lig_dp_it

Who would carry something like this?

Phone Surgeon wrote:afzal hardware in el socorro for brushes
just before larry holder on the opposite side if heading to the bus route direction from the highway

Great, thanks, i will check them out.

Good Evening Fellas,
I am looking for brushes for a Dewalt (D28090-B3) angle grinder. Who carries brushes locally?

Good Evening, i have a Skoda (PBS) with an electrical problem: the battery is drained over a few hours/overnight. I suspect something is shorting as I can hear a ticking noise in the dashboard while the battery has juice left. I am looking for someone who could fix this, preferably in the west/POS a...

Good Morning guys,

i am looking for a mechanic in the west that knows a Skodas.
I have a PBS Octavia that just sat in the garage for two years and it has a lot of small issues and maybe bigger ones too...

car wrote:
Just today I bought some square tube and black pipe and they all specified that they are 5.8m (19’). So it seems they coming shorter and shorter.
Bolt and nut, screws. Check SWS. Southern whole sale.

Thanks for the tip on SWS, I was already planning to go.

pugboy wrote:Steel lengths are usually 19.5 feet or so
Better you organize transport and big extra and clean and prime and store until needed

Yes, that makes sense, i can have my own home depot

Ooops double post, sorry

Hello! New DIY-er here. I have two questions on resourcing materials if you don't mind helping me out with some tips. I am looking for a good place for buying woodscrews and bolts and nuts in bulk for a good price. Now I usually go to Peaks but it seems a bit pricey (just based on that most of their...