Moderator: 3ne2nr Mods
Strugglerzinc wrote:hong kong phooey wrote:Guys any one know the estimated cost of the tau unit presently
$5500 last year, installed, i think 900kg rating. D and S Gate Motors. They're on FB.
pugboy wrote:Tau remotes expensive
RedVEVO wrote:pugboy wrote:Tau remotes expensive
So how many you need ? You get 2 .
200sx wrote:fed up of losing or damaging your gate remote............i was..........
fellars i can install a device on an existing gate motor giving you acess on your phone from anywhere tried it out on my gate and did it on my dads as well............you can get voice command which makes it better with an echo dot not the plus.............and you can give any number of people access.......
im just a diy guy and love technology..............
i need some info about your set up........
THIS IS NOT ADD...............LOL
whatsapp or call 730 0629 rossi
Strugglerzinc wrote:This little device will do it for $30 on Amazon on any motor that can incorporate a press button switch to open/close.
200sx wrote:fed up of losing or damaging your gate remote............i was..........
fellars i can install a device on an existing gate motor giving you acess on your phone from anywhere tried it out on my gate and did it on my dads as well............you can get voice command which makes it better with an echo dot not the plus.............and you can give any number of people access.......
im just a diy guy and love technology..............
i need some info about your set up........
THIS IS NOT AN ADD...............LOL
whatsapp or call 730 0629 rossi
ronsin1 wrote:I use this brand for my gate what I used is the single relay unit not what you quotedStrugglerzinc wrote:This little device will do it for $30 on Amazon on any motor that can incorporate a press button switch to open/close.
RedVEVO wrote:^^
TAU is the better choice ..
5 years no problems ..
hong kong phooey wrote:RedVEVO wrote:^^
TAU is the better choice ..
5 years no problems ..
i just changed out my tau motor . installed another Tau . no complaints with motor hence reason i purchased the same .
tau installed is 5 000
V2NR 3.0 wrote:I need some help. I have this TAU sliding gate motor and I don't know how to put it in manual mode. Can someone tell me ?
IMG_0361.JPG
Strugglerzinc wrote:V2NR 3.0 wrote:I need some help. I have this TAU sliding gate motor and I don't know how to put it in manual mode. Can someone tell me ?
IMG_0361.JPG
Open the part with the key and pull it out, it's hinged and disengages the motor from the gears.
V2NR 3.0 wrote:Strugglerzinc wrote:V2NR 3.0 wrote:I need some help. I have this TAU sliding gate motor and I don't know how to put it in manual mode. Can someone tell me ?
IMG_0361.JPG
Open the part with the key and pull it out, it's hinged and disengages the motor from the gears.
Like actually remove the little door from the unit ? Yank it out ? I'm trying to see what model this motor is so I can YouTube it - but not seeing it.
Strugglerzinc wrote:This little device will do it for $30 on Amazon on any motor that can incorporate a press button switch to open/close.
screwbash wrote:i see some big arse heavy gate using bennica motors and it open fast.
200sx wrote:Strugglerzinc wrote:This little device will do it for $30 on Amazon on any motor that can incorporate a press button switch to open/close.
i used the sonoff basic which is cheaper around 7USD.........
same results, cheaper cost factor......lol
Strugglerzinc wrote:V2NR 3.0 wrote:Strugglerzinc wrote:V2NR 3.0 wrote:I need some help. I have this TAU sliding gate motor and I don't know how to put it in manual mode. Can someone tell me ?
IMG_0361.JPG
Open the part with the key and pull it out, it's hinged and disengages the motor from the gears.
Like actually remove the little door from the unit ? Yank it out ? I'm trying to see what model this motor is so I can YouTube it - but not seeing it.
Open with key and pull outwards like a door. That motion disengages the motor on all TAUs i have seen. To reengage close the door and lock it.
Assuming the key is turning fully but u can't pull out the flap..V2NR 3.0 wrote:Strugglerzinc wrote:V2NR 3.0 wrote:Strugglerzinc wrote:V2NR 3.0 wrote:I need some help. I have this TAU sliding gate motor and I don't know how to put it in manual mode. Can someone tell me ?
IMG_0361.JPG
Open the part with the key and pull it out, it's hinged and disengages the motor from the gears.
Like actually remove the little door from the unit ? Yank it out ? I'm trying to see what model this motor is so I can YouTube it - but not seeing it.
Open with key and pull outwards like a door. That motion disengages the motor on all TAUs i have seen. To reengage close the door and lock it.
For some reason this is not doing anything. Can anyone else suggest an idea or even someone who can come help me out ? If we loose electricity we are basically caged in.
Return to “Ole talk and more Ole talk”
Users browsing this forum: Duane 3NE 2NR and 163 guests