WTK where can i get an ultra clear epoxy?

turboturnsmeon2 · Postby **turboturnsmeon2** » June 29th, 2017, 1:22 pm

As the topic states, does anyone know where i can get an ultra clear epoxy resin to buy locally? I like to look of
Epoxy Resin on bar tops, tabletops & counter tops and hoping to try a diy project.
Peaks has a resin that yellowish.
Farfan doesn't have anything.
ACE paints has fiberglass resin.

Strugglerzinc · Postby **Strugglerzinc** » June 29th, 2017, 1:44 pm

Try epoxy pro Caribbean in Gasparillo.

pugboy · Postby **pugboy** » June 29th, 2017, 4:14 pm

marc one chaguaramas
make sure it is epoxy and not polyester(fiberglass) resin
the epoxy is 2:1 ratio whilst poly is a few drops or something like that.
It not as cheap as poly though

Keeshan Bachan · Postby **Keeshan Bachan** » June 29th, 2017, 8:19 pm

turboturnsmeon2 · Postby **turboturnsmeon2** » June 29th, 2017, 9:02 pm

Thank you, will contact the suggested suppliers.

pjfred · Postby **pjfred** » June 29th, 2017, 10:23 pm

If you get the price please post it?

FullStop · Postby **FullStop** » June 29th, 2017, 10:29 pm

Shilo Enterprises at tacarigua or budget marine chaguaramas... Shilo has ultra clear tabletop epoxy and a harder, less clear epoxy. Budget marine has West systems epoxies

rspann · Postby **rspann** » July 1st, 2017, 9:11 am

Fiberpol in San Juan had the pint kit for $575 yesterday, bought it by Shiloh in Dinsley for $109. One pint epoxy one pint hardener. They also had the quart kit for $168.

daron · Postby **daron** » August 20th, 2018, 9:01 pm

rspann wrote:Fiberpol in San Juan had the pint kit for $575 yesterday, bought it by Shiloh in Dinsley for $109. One pint epoxy one pint hardener. They also had the quart kit for $168.

Hi, how did this work & what was the application was it clear? Will it work for the attached

rspann · Postby **rspann** » August 20th, 2018, 9:27 pm

I used it to install granite countertops. The granite was coral red so I bought the tints and tinted it sort of rust/ pink to match. I used some on an SUV side step that was badly damaged and it worked perfect. It's extremely hard and very clear. Epoxy dries overnight though, not like polyester resin.