Moderator: 3ne2nr Mods
*KRONIK* wrote:Whats that?pugboy wrote:their jack stands or older version have a well known flaw
pugboy wrote:https://www.nhtsa.gov/press-releases/consumer-advisory-harbor-freight-jack-stands*KRONIK* wrote:Whats that?pugboy wrote:their jack stands or older version have a well known flaw
*KRONIK* wrote:Fellaz
Looking for a big floor jack
3ton
Must be able to lift a pick-up
*KRONIK* wrote:Hmmmm
Now checked mine
Brand is Pro-lift
No related part # on itpugboy wrote:https://www.nhtsa.gov/press-releases/consumer-advisory-harbor-freight-jack-stands*KRONIK* wrote:Whats that?pugboy wrote:their jack stands or older version have a well known flaw
dan86 wrote:Universal ball joint separator.
Laughlin and DeGannes south had 1 a few weeks ago. Gearwrench about 3 hundred.
I paid 4 hundred over a year ago but its good quality and heavy
- Rovin's car audio - wrote:diablo router bits from amazon , it bad like crab & cutting like hot knife thru like butter
i have 1 or 2 extra brand new flush cutting router bits diablo & makita 2" flutes [1\2" shaft] if anybody wants it to buy ......
G-DUB wrote:Anyone knows where I can get this?
It's called flattened expanded metal sheet.
supercharged turbo wrote:Who repairs floor jacks?*KRONIK* wrote:Fellaz
Looking for a big floor jack
3ton
Must be able to lift a pick-up
ru$$ell wrote:looking for a ball joint separator, specifically one like this. Anyone know where i can get it?
G-DUB wrote:Anyone knows where I can get this?
It's called flattened expanded metal sheet.
G-DUB wrote:Thanks Idrees have the zinc coated mesh which would suit my use.
Price is $730 a sheet they also have the normal steel mesh for $495 I think bhagwansings have that cheaper.
G-DUB wrote:I'm using it as kennel flooring for puppies so it will be seeing alot of water.
*KRONIK* wrote:Paint it with a marine paint as a primary rust prevention, the zinc coating will act as a secondary protection.
Just because its steel that gonna be wet often.G-DUB wrote:I'm using it as kennel flooring for puppies so it will be seeing alot of water.
pugboy wrote:galv will need etching primer
the rabbit folks use a particular galv mesh for their cages which is specific for rabbits which have corrosive pee*KRONIK* wrote:Paint it with a marine paint as a primary rust prevention, the zinc coating will act as a secondary protection.
Just because its steel that gonna be wet often.G-DUB wrote:I'm using it as kennel flooring for puppies so it will be seeing alot of water.
G-DUB wrote:I'm using it as kennel flooring for puppies so it will be seeing alot of water.
X_Factor wrote:G-DUB wrote:I'm using it as kennel flooring for puppies so it will be seeing alot of water.
a friend used 5/8 pvc sheet and a 1/2 inch router bit to cut channels in the board every 8 inches
no issues with water, and not as cold for the dogs
supercharged turbo wrote:Which AA/AAA battery holding out better than Energizer?Tried the Westinghouse that selling everywhere and the Panasonic from Pennywise.The Westinghouse is the worse of the lot.Duracell kinda okay.
VexXx Dogg wrote:The eneloops seem to deteriorate with lack of use.
I have some for my flash, which is rarely used and now they give me significantly less pops