Moderator: 3ne2nr Mods
Parvin wrote:Assistance please guys.
Ac/blower controls stopped working. I checked all fuses and they’re good, yet still it’s not working. The panel lights up when the park lights are turned on but that’s all I’m getting from it.
It worked fine this morning. When I tried to use the ac this evening I realized it wasn’t working.
Was a scan done to determine if there are any bad sensors. It's a possibility the crank or cam sensor is bad.nissan4life wrote:My cs brothers it's been a long time.asking for my cousin as I ve never come across this issue
Cs3 with a 4g18 engine,tumbles but refuses to start.
He changed coil packs and I determined fuel pump is working and the car is receiving good fuel at injector side.
I tested coil plugs are receiving just below 12 volts to the coil harness with ignition on.
Tried testing for a spark by tumbling the ignition with spark plugs grounded to the body.
One minute I can see the spark and another nothing at all.
Anyone ever experienced this before or have any ideas.
crank or Cam sensor can cause these issues?
Any advice would be greatly appreciated
special thanks to djruncrowd, it was exactly what you stated.
After checking the crankshaft sensor for no start no spark, i realised this was the cultprit. while changing it out I also noticed the connector for it (closest to timing belt cover)had become very brittle, so i cut and crimped spades to that as well to avoid any future issues.
Cousin car is back to starting in one tumble
nissan4life wrote:venum with the current crime situation you cant be driving by them hrs of the morning.
Thats hour for corn.
Ronsin the issue was sorted out but to answer you, no cel came up so the car was not scanned. on advise from djruncowd i tested for no start no spark condition on the coils and realised the crankshaft was bad and the connector closest to timing belt was also brittle. Time i unplugged the sensor the whole adapter came apart in my hand.
I literally had to plug each wire back into new crankshaft sensor and use silcone to bond the connectors together in the plug.
nissan4life wrote:Parvin wrote:Assistance please guys.
Ac/blower controls stopped working. I checked all fuses and they’re good, yet still it’s not working. The panel lights up when the park lights are turned on but that’s all I’m getting from it.
It worked fine this morning. When I tried to use the ac this evening I realized it wasn’t working.
Cs forum not what is used to be, men not helpful at all this rounds.
Parvin first thing is to check if the compressor is engaging, also check if the blower motor is getting 12v on harness or you can take blower motor out and check directly to battery. This will eliminate the blower as the cause.
It could also be the ac control unit itself as those units/contacts go and you may only get the ac to turn on ,on one speed (usually the one you used the least,number 4)
ZeroOne wrote:
You check for leaks?
wagonrunner wrote:Anyone running 205/60/15 tires or larger on their CS3?
If you are, what brand and size?
Primo-El wrote:Anyone know where I can get the power steering pump and high pressure line for the Cedia?
BoostJunkieXL wrote:Primo-El wrote:Anyone know where I can get the power steering pump and high pressure line for the Cedia?
which engine ?
ThanksZeroOne wrote:@gastly369 Yes it will work.
@Primo-El
I got the line at the bamboo last week. However be careful that your mech installs it correctly.
2 big car companies in POS installed mine incorrectly some years ago, they jammed it on the alternator and of course the line teared.
Also make sure that there is the rubber piece between the hose and the top metal arm that holds it in place.
ZeroOne wrote:@gastly369 Yes it will work.
@Primo-El
I got the line at the bamboo last week. However be careful that your mech installs it correctly.
2 big car companies in POS installed mine incorrectly some years ago, they jammed it on the alternator and of course the line teared.
Also make sure that there is the rubber piece between the hose and the top metal arm that holds it in place.
Around 400 f/ukatalist wrote:So I got up this morning and noticed a I turned on my ignition the fans came on. Can this be any other problem other than the module on the fans.
And by chance how much is the module.
Thank guys and gals
Users browsing this forum: No registered users and 23 guests