CY LANCER ABS pump service/fix

lancer1929 · Postby **lancer1929** » October 4th, 2018, 3:53 pm

Hey anyone knows someone who can service/fix the ABS pump for the 2008 local CY lancer??
The ABS Sensor light keeps coming on even after replacing the sensor multiple times.

nissan4life · Postby **nissan4life** » October 8th, 2018, 2:44 pm

Had a similar issue on CS lancer. wasnt the sensor. Ended up being one of the teeth on the ring where the sensor reads the information was damaged. Just a fyi, you might want to check this before looking at servicing or replacing abs pump
Abs pump/control module should not give issues especially if the braking system is working as it should be.

anthonyanthony · Postby **anthonyanthony** » October 29th, 2018, 3:51 pm

My vehicle is 8 yrs old and doing approx 160000 km.
Once in a while the abs light would come on and scan tools would show the left front abs sensor.
The problem usually goes away.
Also once in a while , if I brake hard to cause the ABS to function the brake pedal would get softer and sink to the floor. Afterwards it functions normal. No leaks seen , fulid level is good.
Anyone ever had this problem

Postby **nervewrecker** » October 29th, 2018, 10:03 pm

Sounds like the seals in the master.

lancer1929 · Postby **lancer1929** » January 2nd, 2019, 11:21 am

Nissan4life...where did you carry your vehicle to check the "teeth"?

lancer1929 · Postby **lancer1929** » April 1st, 2019, 6:57 pm

Nissan4life...where did you carry your vehicle to check the "teeth"?

Barrychund · Postby **Barrychund** » July 6th, 2019, 3:41 am

I have a Lancer and it was showing Engine switch light and after diagnosing P0123 TPS A circuit low input, P0223- TPS b circuit High input. P1233- Fuel pump driver module offline P1234- Fuel pump driver module offline were found. I think i need to change the TPS but what should i do for the fuel pump error i have no idea.
Any idea what are the fix for these errors?