WTK, Adhesives/Glues/Epoxy to re-stick sub (see pics)

ron_28 · Postby **ron_28** » October 31st, 2018, 11:24 am

Good day all

Would like to know what i can use to re-stick my sub?
Its a Pioneer Premier TS-W3002SPL.
heard it making noise an realized the outer cone started to detach, i carefully removed it guessing from taking licks over all the years..lol
everything else intact an original in sub and it was never repaired before.
see pics below

Rovin · Postby **Rovin** » October 31st, 2018, 11:53 am

better u take it to a reputable speaker repair guy who shud have proper CA glue & let him stick it ...

L'Audi · Postby **L'Audi** » October 31st, 2018, 1:27 pm

E6000 for the dustcap and surround. If your spiders came loose, you'll need either CA glue or locktite 5 minute epoxy. The spider landing (basket) needs to be cleaned of any prior adhesives or paint btw.
(note: If your softparts are already loose, you may have already started to damage the coil)

Postby **nervewrecker** » October 31st, 2018, 3:31 pm

Lil chewing gum and you on

black start · Postby **black start** » October 31st, 2018, 9:30 pm

nervewrecker wrote:Lil chewing gum and you on

You mean chingum

ruffneck_12 · Postby **ruffneck_12** » November 3rd, 2018, 8:42 pm

L'Audi wrote:E6000 for the dustcap and surround. If your spiders came loose, you'll need either CA glue or locktite 5 minute epoxy. The spider landing (basket) needs to be cleaned of any prior adhesives or paint btw.
(note: If your softparts are already loose, you may have already started to damage the coil)

This.

Otherwise regular crazy glue will hold it good enough. Make sure all surfaces are glued otherwise it will rattle and annoy the hell out of you.

If this came loose I'd check the other glued joints as well though