Forums

hong kong phooey

what about your steering ends are they ok
best thing to do it take it to an allignment place in south (north they charge u money to check it ) and let them put it up on the ramp and shake the tire will see if the ends loose or bad

hong kong phooey

yeah well i think they do good work. thats my opinion i could be wrong

hong kong phooey

Aaron do u know what type of connector he use . does he just use a 2 pin connector ?

hong kong phooey

waggon runner, there is a couple people down here that diagnose the car. my was sucessful. but i have since wrote off that person because as u can see from the pic the f*cker removed the pin out label that was under the diagnostic cap. i think that was wrong. now other people will have to guess what...

hong kong phooey

hey Mig, is this what the connector look like . Does anybody know what diagnostic protocol this uses i taught it is obd1 but the jack is not an obd1 or obd2. Could any one verify that it obd1

hong kong phooey

It have a good garage in ramai trace debe. On the right hand side when you going in (couple garage on the lefthand side not those).it about a half mile inside just before u start i think is the second hill always have maxis in the yard cannot miss it

hong kong phooey

how did u do it ?

hong kong phooey

here is some sites that does some comparisons when i was looking and speaking to people most say that the plasma takes a little while to get the true colour and the life span of the plasma is shorter http://www.flattvpeople.com/tutorials/lcd-vs-plasma.asp http://www.lcdtvbuyingguide.com/lcdtv-plasma...

hong kong phooey

Thanks there mazdamig what mazda is this 36pin connector on. what year?

hong kong phooey

ah simple check to see if the screen working with a dvd player is to try one . If you remove your head unit u will see if there is an auxilary input in the back. some of them dont dive u the option to select auxilary input if nothing is plugged into the auxilary input. if u have an auxilary input u ...

hong kong phooey

Ah lil help please
Looking for an upholsterer in south who could install a screen into the headrest .

hong kong phooey

Depends on how much u want to spend. as SR said if you happy with the quality of your screen u could just buy a dvd deck and use your original screens (although they are a bit small). If you have the money buy bigger ones. burn your music on a dvd and u dont need a cd changer 1dvd can hold almost 10...

hong kong phooey

Depends on how much u want to spend.

hong kong phooey

ah not in the country so i cannot check this for myself. i am trying to get a picture of the diagnostic connector in the 323f 95 ,96,97and 98 model (anyone). this connector is located in the bonnet attached to the fuse box . Just have to open the cap and take a pic. or just verify it is a 12 pin con...

hong kong phooey

I use the OBDII allinone scantool www.obd2allinone.com. this scan tool comes with either usb or serial interface the interface to the cars is compliant obdII connectors (newer local cars. japanese foreign used cars and european cars newer than 96 ) Additional cables are available for older cars also...

hong kong phooey

What is the latest with your cooling problem. have u found the solution

hong kong phooey

i was trying to research your problem and most solution to the pinging problem u covered already . some suggest to check the cooling system(which i also beleive might be causing your problem) check that the fan and thermostat is operational and your system does not have any blockages also or use a c...

hong kong phooey

Those cars are veryexpensive to maintain and some of the parts difficult to get, some of them u have to source directly from london.
Some models of the A4 there is alternator problems.

the cars are realy nice thoughif u buy them from new. Sweet ride

hong kong phooey

Dont know if this is any help but if that is the stock engine
the model no will be in that little plate in the center of the second pic on the fire wall

hong kong phooey

yeah boy i did not think of that, but what hook said is a possibility and i remember u mentioning that those boys having to adjust the hole for the cap to fit. Originally i taught it was just the sides of the hole was adjusted but if they messed with the seat also that could cause the problem. if u ...

hong kong phooey

when u say crack on the reservoir what u talking about the over flow bottle ?

hong kong phooey

About those leaks u will only see them when the engine is hot if it is a slow leak it will be difficult to see. I still beleive most likely it might be the clip, are u using the original mazda clip the self tensioning one? if u are i would recommend the normal hose clip which u tighten with a screwd...

hong kong phooey

Check your radiator cap. if the rubber stretched in the cap it may cause the radiatior to seal and prevent it from releasing the excess pressure back into the overflow. this overpressure will cause your leaks. U probably have a bad hose clip or a small pin hole leak in one of the rubber hoses which ...

hong kong phooey

what year is your vehicle
I have a diagnostic tool that might be able to tell what is causing the fault and turn off the fault if u still having the problem

hong kong phooey

Thanks cheese

hong kong phooey

Could u recomend the person and location who u went to to do the diagnostic by ?

hong kong phooey

what series tires U using on the car ?
you could try using a higher series tire that will give u a little more clearence

hong kong phooey

yeah after i remove mine, i find the car run better also , a lil more nitros oxide in the atmosphere

hong kong phooey

Anyone know where you can get this profesionally checked (name and location or phone number of some one who looks at this ) i check 2 guys who does diagnostic and they came up with nothing but mines is working sometimes when it feels when it does not work the light come on. some times it is working ...

hong kong phooey

u must never admit u going more than 80 km
even if u doing 160

Forums

Search found 3162 matches

WtkInstalling dvd screens in headrest

diagnostic connector

Still having problem