Forums

nissan4life

Fellas pentax pump only about a yr old is leaking between where the pump two halves is bolted together. Its the casing where the impellar is located, theres a metal shaft that is spitting out water everytime the pump is engaged. Have any idea what part needs changing, should just be a rubber/seal ri...

nissan4life

1. Open a door 2. Turn the ignition on, then back off. 3.Press and HOLD the Valet/Program button:After three seconds the siren will chirp once and the LED will flash once indicating entry to the Basic Features Menu #1. 4.Press and release the Valet/Program button the number of times corresponding to...

nissan4life

avenall wrote:Police men accessing stocks for Christmas early. Truck driven by BARR BOO LAL....

^^^
lol..men here sick yes

nissan4life

help and info needed on cs3 brake binding [very bad]. car is holding back due to this so rotos got hot started to smell d brake pads, so today i checked and found brake fuild all over d fuse box, intake box, battery and ABS pump areas. Both the fronts brakes r holding and whilst i drive it and keep...

nissan4life

ABA i have used the engenius brand,works damn well over long distances..These are pretty good long distance devices and are superior to cisco and tp link in terms of not dissipating signals tru walls and metal structures. These however use directional antennas and you will be limited to the span in ...

nissan4life

^^^ If its only when applying brakes.I would inspect if brakes are seated properly first /missing anti shimmer clips. stabilizer links, ball joints CV usually make grinding noise when pressure is applied on the turning force. where to get the rubber strips that under the bonnet? bamboo from a bonnet...

nissan4life

opened ports on the comtrend router, followed up with TSTT to make sure they were not blocking any of the ports and that there firewall was disabled and then verified open ports with online port scanner. TSTT 2mb connection gave me alot of problems with the video stream,it wasnt very reliable. flow ...

nissan4life

You looking at vacuum leak. Mishi said it best This happened to me already and it was just the hose from engine to air intake wasnt secured properly. Also check and clean you pcv valve. Clogged/non functional pcv will allow air back into the chamber causing engine to have weird idle,stall or have po...

nissan4life

Sorry if i wrote a bit confusing i just wanted to my story across. Well should begin with saying i dont have a automatic CS3, its a Manual CS3/ Clutch, so as to puting it into park thats out of the question. but i get where your coming from. I did what you said before, when it come to switching off...

nissan4life

i own a Manuel Cs3 Mitsu and i have read alot of solutions to this problem, from replacing the idle speed contorl valve to the "flat head fix" and all sorts of things, basicly anytime i remove the battery or remove one of the terminals even if just for a second when the car comes to a sto...

nissan4life

so far we have Stallion - turn into the street as if heading towards the racetrack, will see it on the left hand side...about 2 mins drive from the higway Marianas - heading on the main road, there is a big sign after bermudez, just follow instructions to reach Secret Garden - Felicity side... you'...

nissan4life

wagonrunner wrote:any one knows what size clips for CS3 front stone shields, or when can i get them?

Best bet is to take off one. ... Motorist, jurawan, mathuras (all west side based) have these.
Most automotive places should have these and well as some automotive paint shops.

nissan4life

Moses could by your map thats goings. Your on the right track with having it scanned, just make sure its by someone who knows how to use the obd11 tool and not just scan the car and say there are no errors. Another possibility when having the car tested is to let technician look at your map readings...

nissan4life

Yeah it's PO513. From all indicating it looks like I have to get a new key and get it programmed. Does the guy in curepe do such jobs? A new key programmed is between 1200- 1500 depends on model of car and type of key they using. I did mine at JEL Enterprises in valpark 645-9535. This is the only b...

nissan4life

Banzai you mind writing the codes, kar see to good nah I seeing po513 which is fault code for immobilizer key. Never experienced this on a cs before but on a toyota yes. On toyota the car wouldn't not start at all, not even tumble. This was solved by having a new chip key re programmed to pcm. But i...

nissan4life

Moses you speaking about gdi or 4g18? Try resetting the ecu. take off negative pole on battery for about 30mins and re install. Car has to be started until it comes to mid temp in park. switched off and restarted again to retrain ecu with proper air and fuel ratios. I cant see iacv doing this if it...

nissan4life

Guys so hear the issue i am having with my CS. I changed the IACV two Saturdays ago , the mechanic told me that the car would need to be driven for a while for everything to synchronize..however Friday gone there while driving around the savanna the car started to jerk around violently with the rev...

nissan4life

flow adsl device acts as a modem not a router, any/all provision/s are made by them.
Do you self a favour and buy a secondary router so you can manage for your self.

nissan4life

nightman just as trapstar said fuel pump,throttle body but there is also the egr that comes with the gdi engines. There 's a post from raybic on how to clean intake and block off egr. This recirculates exhaust back into the chamber. NOT a good idea if you ask me. This is my next step as my car somet...

nissan4life

Yea i forgot to mention that. once the abs light comes on the brakes will work properly, but i would still be very careful.
Once you shut off and restart the car you will basically have the same problem where the brakes will be unresponsive. Have this sorted out before something serious happens

nissan4life

Dave and rosin thanks fellas will look into it. eekipoo. the first problem is related to your abs ring. I had this issue when i changed my cvt joints and did not get the abs ring with it. The abs rings were taken off the old cv joints and put back on to the new, one ring had a very slight dent on on...

nissan4life

Fellas small problem, trunk light doesnt come on when i open the trunk, if i open a door it will but if i close the door and the house lamp turns off so does the trunk light. Havnt seen any fuses for trunk nor do i have any blown. Some one told me of a switch on the trunk latch itself. Any one ever ...

nissan4life

fellas i have a 2002 lancer gdi...i replaced the battery and now everytime i start up it shuts down and when i do get it to start it rough idles..this has happen to me already after pulling the one of the terminal but it fixes it self after a few days..so just wondering if they is a quicker way to ...

nissan4life

Well i have an aluminum radiator. Working in d car normal a couple years now. Only ran coolant in the car also. I pulled down d radiator,looked like new. Still cleaned it out an put it back an d same thing happened. Fan controllers expensive, so thats why i left that as the last option. I will chec...

nissan4life

Having a lil issue guys. When d a/c is on,d temp goes up high. But when d a/c is off, it operates normal. I've checked back both fans,both spin at d same speed,very powerful. The fan remains on about 5 secs after u switch off. I know d fan controller cud be bad. Cud d fan controller be causing this...

nissan4life

Fellas outer cv joint on cs2a (gdi)lancer needs replacing. Any one ever did this. Location of sourcing part preferably new would be nice.

nissan4life

btw, has anyone here ever done the switchblade key? I have the Clifford alarm i got from the Firm 9 years ago, and wanted to change it to a switchblade. Wanted to know if anyone here ever sourced a good switchblade case. kuraman pm idlemind.he did this already,know its somewhere in here but it can ...

nissan4life

hey guys i'm having a lil issue......sometimes when i start on mornings the car cuts off. I restart and then it idles rough for a lil bit then back to normal. I changed the plugs and service injectors, still get the problem. A mechanic suggest that it might be something to do with some part by the ...

nissan4life

Nidish wrote:Anyone know which bulbs the fog light use? Thanks

CS2 rectangle fogs uses HB4/9006 think the 2004 Cs go forth models use HB3/9005

nissan4life

hard to hear boy ice fox...From the image looks like back subframe dun damage..sell one time save you self the headache

Forums

Search found 491 matches

Re: Which residential water pump to buy?

Re: How to turn-off passive arming on viper alarm

Re: Accident after Chaguanas

Re: The Official CS Lancer Thread!

Re: Connecting 2 WLANs

Re: The Official CS Lancer Thread!

Re: Viewing DVR over TSTT Blink Zhone router without static

Re: CS3 idle issues "constant idle fluctuation"

Re: low idle on CS3. help please

Re: low idle on CS3. help please

Re: The Official looking to gutz/find a Guest House Thread

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: Flow routers

Re: 4g93gdi ac idel help

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!

Re: The Official CS Lancer Thread!