TriniTuner.com  |  Latest Event:  

Forums

Search found 790 matches

by Groovemaster
August 4th, 2020, 9:02 pm
Forum: Ole talk and more Ole talk
Topic: OSHA / HSE ppl...
Replies: 7
Views: 583

OSHA / HSE ppl...

An accident occurred and I need to submit documents to OSHA. The accident was a contracted worker got his foot damaged by a mini excavator. Two requirements are : 1) Records evidencing supervision of the operator 2)Records evidencing instruction of the excavator operator. What specific documents are...
by Groovemaster
January 23rd, 2020, 2:05 pm
Forum: Trucks & Pickups
Topic: TECH Thread - MITSUBISHI L200, Sportero, Triton.
Replies: 1829
Views: 316637

Re: TECH Thread - MITSUBISHI L200, Sportero, Triton.

Have you changed your transmission filter yet if not you should look at doing that mine was changed at 200K km and it was very dirty Thanks. was going to do two drain and refill but will change filter too. On another note I see this info on page 1...... " Transfer oil Gear oil API classificati...
by Groovemaster
January 6th, 2020, 6:36 pm
Forum: Trucks & Pickups
Topic: TECH Thread - MITSUBISHI L200, Sportero, Triton.
Replies: 1829
Views: 316637

Re: TECH Thread - MITSUBISHI L200, Sportero, Triton.

Anyone using Amsoil Multi Vehicle Synthetic ATF. I find the SP III gets dark/burnt too quickly....probably under 15,000km. I' ve read previous posts far back as 2013/16 wrt the Amsoil multi vehicle atf where it was noted that the spIII is also used in cvt transmissions and one should not risk using ...
by Groovemaster
December 20th, 2019, 8:49 pm
Forum: MITSUBISHI
Topic: Sportero Back Pressure?
Replies: 0
Views: 3023

Sportero Back Pressure?

uFptoRRRFBU After a drive from Freeport to Claxton Bay. I reached home to change the engine oil (first time changing diesel vehicle oil...its a company vehicle). When I opened the oil cap I noticed it smoking. I asked around and a few people said thats a sign of the engine back pressuring. Its the ...
by Groovemaster
January 23rd, 2017, 2:58 pm
Forum: Ole talk and more Ole talk
Topic: Turf/Ground Protection Mat
Replies: 0
Views: 339

Turf/Ground Protection Mat

Good day Tuners, Where can I rent turf/ground protection mats? Got to track some heavy equipment on a cricket field without damage to the grass.

Assistance greatly appreciated.
by Groovemaster
September 15th, 2016, 9:31 pm
Forum: Ole talk and more Ole talk
Topic: What Height?? - Safety Harness
Replies: 10
Views: 1248

Re: What Height?? - Safety Harness

Cool just wanted to confirm....General industry still 10 feet though?
by Groovemaster
September 15th, 2016, 9:11 pm
Forum: Ole talk and more Ole talk
Topic: What Height?? - Safety Harness
Replies: 10
Views: 1248

What Height?? - Safety Harness

HSE Tuners.....

Whats the correct "legal" height one would need a safety harness if on a temporary work platform/scaffolding?

Is there still different requirements for construction and Gen Industry?
by Groovemaster
May 7th, 2016, 1:37 am
Forum: MAZDA
Topic: Show us your BJ!
Replies: 2052
Views: 158512

Re: Show us your BJ!

Image
by Groovemaster
March 20th, 2016, 7:32 pm
Forum: MAZDA
Topic: BJ Auto shifter Info needed
Replies: 0
Views: 1627

BJ Auto shifter Info needed

Tuners, what causes the auto shifter in my BJ 323 to feel really smooth when coming out of any position? It feels almost "slack" with a tiny smooth "click" instead of a firm feeling like how it was in the younger years...
by Groovemaster
March 13th, 2016, 2:36 pm
Forum: The Car Park
Topic: 2010 forester sluggish going uphill
Replies: 17
Views: 3695

Re: 2010 forester sluggish going uphill

When you press the accelerator to go faster ...... does it feel like the gear don't drop and it's trying to climb the hill in third gear? Why I ask I have the same problem (Mazda 323). I tried coilpacks, change tranny oil and strainer, engine oil, TB service and clean.....I don't know what again it ...
by Groovemaster
March 5th, 2016, 2:02 pm
Forum: Ole talk and more Ole talk
Topic: WTB - Non-Stick Pan set
Replies: 5
Views: 1037

Re: WTB - Non-Stick Pan set

Nice.....Thanks.....Keep those stores coming.....
by Groovemaster
March 5th, 2016, 1:13 pm
Forum: Ole talk and more Ole talk
Topic: WTB - Non-Stick Pan set
Replies: 5
Views: 1037

WTB - Non-Stick Pan set

Where locally can I purchase a really nice non-stick pot/pan set. Looking for a really durable (famous) brand. Something like these...
http://www.consumersearch.com/cookware/ ... k-cookware
by Groovemaster
February 14th, 2016, 5:57 pm
Forum: MAZDA
Topic: mazda 323 bj aftermarket headlights
Replies: 1
Views: 2302

Re: mazda 323 bj aftermarket headlights

Faiz have the dark housing Cateye model for $1650 but i believe it is for left hand drive cars...
by Groovemaster
December 7th, 2015, 7:41 pm
Forum: MAZDA
Topic: Help.......looking for a working zm-de automatic transmissio
Replies: 1
Views: 2073

Re: Help.......looking for a working zm-de automatic transmi

Check Maztune....I think he has one for $3500
by Groovemaster
December 2nd, 2015, 7:36 pm
Forum: MITSUBISHI
Topic: Sportero Balancing shaft belt
Replies: 2
Views: 1302

Re: Sportero Balancing shaft belt

Nah, the mech say drive it back to the shop..
by Groovemaster
November 30th, 2015, 8:30 pm
Forum: MITSUBISHI
Topic: Sportero Balancing shaft belt
Replies: 2
Views: 1302

Sportero Balancing shaft belt

Tuners.......is a balancing shaft/s installed in other competing models. I think it's crappy that Mitsubishi keep this mechanism just to have less vibration. Company Sportero with 4D56 doing 87,000km balancing belt burst.....Mechanic say drive it back to the shop which is about 5mins drive. The engi...
by Groovemaster
November 12th, 2015, 4:23 pm
Forum: Trucks & Pickups
Topic: Mitsubishi Triton: staying in 4wheel drive
Replies: 18
Views: 6754

Re: Mitsubishi Triton: staying in 4wheel drive

Guys can this cause any problem like the 4wd engaging and damaging the engine? Why i asked is I started getting a hard start one morning and when leaving work that same day it felt like the 4wd engaged and the van slowed down . I started hearing a scraping sound and the van lost power. It felt like ...
by Groovemaster
October 20th, 2015, 5:16 pm
Forum: MAZDA
Topic: 323 BJ ABS issue
Replies: 4
Views: 1920

Re: 323 BJ ABS issue

Rear right sensor usually goes bad first. Check resistance with mulitmeter and compare with other abs sensors on car. The bad one may give 0ohms or over 1700ohms........I think.......U can google it or download the service manual
by Groovemaster
October 2nd, 2015, 5:24 pm
Forum: Ole talk and more Ole talk
Topic: What's the best brand of bearings
Replies: 12
Views: 1172

Re: What's the best brand of bearings

OP you sure there's not another issue causing the bearing to fail so quickly? After three years of owning a F.U car the front bearings needed changing. I used KOYO.....it lasted about one year.....I ended up changing bearings annually using KOYO. My conclusion is the shop used air gun for everythin...
by Groovemaster
October 2nd, 2015, 5:07 pm
Forum: Ole talk and more Ole talk
Topic: WTK - HDPE 10" Pipe for MOWI Project
Replies: 6
Views: 873

Re: WTK - HDPE 10" Pipe for MOWI Project

Tried TOSL.....would try others....Thanks!!!!
by Groovemaster
October 2nd, 2015, 4:22 pm
Forum: Ole talk and more Ole talk
Topic: WTK - HDPE 10" Pipe for MOWI Project
Replies: 6
Views: 873

WTK - HDPE 10" Pipe for MOWI Project

Good day Tuners where can I get corrugated HDPE Pipe 10" internal diameter?

Thanks.....
by Groovemaster
October 1st, 2015, 7:49 pm
Forum: MAZDA
Topic: help!! mazda 323 tranny prob
Replies: 1
Views: 1240

Re: help!! mazda 323 tranny prob

get it scanned....prolly a shift solenoid
by Groovemaster
September 27th, 2015, 5:52 pm
Forum: Ole talk and more Ole talk
Topic: what would you do if this happens to you
Replies: 88
Views: 6164

Re: what would you do if this happens to you

pinto101 wrote:open trunk put injun in barrel when he tries come out see what happens

:lol:
by Groovemaster
September 25th, 2015, 9:42 pm
Forum: Ole talk and more Ole talk
Topic: Government achievement thread.
Replies: 4100
Views: 293679

Re: Government achievement thread. PNM EDITION.

:evilbat:
desifemlove wrote:
wagonrunner wrote:Day 17 - [uml]PNM builds HDC homes in debe in 17 days.[/uml]
What going on with his people? vex wid moonilal?



Ent he build these houses? or this is another PNM fault?



HDC Engineers approved designs so don't blame the PNM for this....
by Groovemaster
July 14th, 2015, 12:40 am
Forum: Ole talk and more Ole talk
Topic: WTK - Dimmable LED Downlights
Replies: 35
Views: 1938

Re: WTK - Dimmable LED Downlights

Duane 3NE 2NR wrote:
Groovemaster wrote:^^^ nah ...I guess I would put them on a switch and make the lights in the chandelier dimmable

Thanks for the info guys
what is the brand of the bulb?


ECOMAX L16641-14-02
00390-1 100-277V 3W 5000K
by Groovemaster
July 13th, 2015, 1:13 pm
Forum: Ole talk and more Ole talk
Topic: WTK - Dimmable LED Downlights
Replies: 35
Views: 1938

Re: WTK - Dimmable LED Downlights

^^^ nah ...I guess I would put them on a switch and make the lights in the chandelier dimmable

Thanks for the info guys
by Groovemaster
July 13th, 2015, 12:13 pm
Forum: Ole talk and more Ole talk
Topic: WTK - Dimmable LED Downlights
Replies: 35
Views: 1938

Re: WTK - Dimmable LED Downlights

Each bulb is 3W
by Groovemaster
July 13th, 2015, 12:02 pm
Forum: Ole talk and more Ole talk
Topic: WTK - Dimmable LED Downlights
Replies: 35
Views: 1938

Re: WTK - Dimmable LED Downlights

Sooooo......They not dimmable....called lighthouse. I specifically asked if they were before I purchased...paid $85 per bulb and now found out the dimmable is $185.
by Groovemaster
July 13th, 2015, 11:58 am
Forum: Ole talk and more Ole talk
Topic: WTK - Dimmable LED Downlights
Replies: 35
Views: 1938

Re: WTK - Dimmable LED Downlights

The dimmer switch/potentiometer is "T&J" from Modern Elect. I'll get the model of the bulb later. The led's are on a separate breaker and switch. The only thing i find odd is the electrician put 12 on one switch....I believe the Inspectorate allows nine per switch......???

Go to advanced search