Forums

fras

SR wrote:What are the fuse rating on the new amp and what load will each channel see?

Mono amp is 100 amp, would be playing at 1 ohm (1400x1)
4ch amp is 80 amp, would be playing at 4 ohm bridge (300x2)
These are the manufacturer fuse rating

I forget to mention, I'm also using an epicenter!

fras

i really cant say. is if u could link up wiht some one with a clip on ammeter, to directly check current draw, while all ur typical current drawers are on, i.e. headlight, ac(the fan comes on). i thought was an older vehicle and would guestimate a 40a was used by the vehicle. the newer ones, i cant...

fras

Here is what's really up... I have a small 5ch system (600 rms) and was looking to upgrade to a 2000 rms system. But I don't want to go over my budget, which doesn't include an additional battery! Currently have the factory alternator (140 amp?) and an optima yellow top battery (55 amp hour). Would ...

fras

sMASH wrote:
fras wrote:On a vehicle with a 140 amp alternator, approximately how many amps would be available for audio at idle?
Vehicle is diesel btw!

What vehicle u put the tiida alternator in?

It's a 2018 hilux, I was told the alternator is 140 amps!

fras

Depends on what you have adding load to the electrical system as altec mentioned. Lights, ac, even your radiator fans will draw and reduce the total power available to your amp. Get a clamp meter that can read DC amps, and check the power being delivered at the amp power input for a better idea of ...

fras

altec wrote:Depends on the current draw, which depends on how much electrical stuff you have running eg headlights. Electrician can measure that for you easy.

ok cool

fras

SR wrote:28

ur joking right?

fras

On a vehicle with a 140 amp alternator, approximately how many amps would be available for audio at idle?
Vehicle is diesel btw!

fras

Guys, what the part # for the clock spring? Local 1.6

fras

Fitalpro & nb1

Chrome saying that link unsafe

fras

Hey guys, noob speaker wiring question here... Wiring four 8ohm mid-range speakers and four 4ohm tweeters to a 4ch amp? If I bridge the ch1&2 on the amp to play two 8ohm mids (left side mids), I would have to run separate wires for the tweeters and wire them stereo on ch1&2? https://forums.t...

fras

where to get this exact headlight in trini Are you the same guy that was asking about this light on facebook? Dont think you'll get this light here... I ordered a set back in 2015 and paid about $3500 ttd landed! https://forums.trinituner.com/upload/data/e8/10968583_876004995784774_2061615689558013...

fras

Thanks man

fras

Guys, anyone has the part # of the clock spring for CS3A?

fras

I'm not sure if it would work for your 4G93

fras

Have some parts if anyone interested...
Act clutch kit (hd pressure plate & 6puk sprung clutch) $2,500
Used oem flywheel with bolts $750
Ngk #7 spark plugs $250
Oem mivec spark plugs $325

fras

Mercenary wrote:new owner get thru deyyy

fras

thanks guys

fras

Black carbon fiber hydro-dipped finish characters with white carbon fiber hydro-dipped finish background-$1395 a pair

How long would this take to make?

fras

that fog lamp is hideous and the light is blinding to on-coming drivers!

fras

not a direct swap, but subaru tdo4 is a good option!

fras

trebornattaj wrote:Np 300 engine is remodeled yd25tt, known issues still exist with this, go with the hilux or take a look at the VW Amarok, you'll be pleasantly surprised

will look into amarok

fras

Ted_v2 wrote:Buy neither. Buy the np300

reasons?

fras

What are the pros and cos... 4x2 manual ford ranger vs 4x2 manual toyota hilux?

fras

now seeing this... u gt?

re-use your cedia front & back mounts
any cs/cedia/ck gearbox mount will work
the driver/left side mount is from a cs/cedia with 4G93 engine

fras

fras

Finally got around to doing timing belt (belt, tensioner, cam seals, crank seal, water pump & thermostat), did oil and coolant change as well! https://forums.trinituner.com/upload/data/e5/42655694_2018355841549678_8710566105787138048_n.jpg Have rocker cover & spark plugs seals to change late...

fras

https://www.evolutionm.net/forums/evo-how-requests-questions-tips/444009-how-hvac-double-din-mod.html https://youtu.be/mxYSjphwYSs their are kits where u dont have to cut the trim... i found this was cleaner/better looking as i have gauges... could go single din dvd https://forums.trinituner.com/up...

fras

sold the kit to a padna and he installed... no switching of stickers, but plenty cutting required and the cables for the controls are pulled tight to get down there!