There are many misconceptions about Eco-Drive. First of all they all contain a battery in the form of a rechargeable lithium cell, these are NOT capacitors. They all usually have to be changed out sooner than later. I have a decent number of Eco-Drives in my collection so this is from experience. Th...
Depending on the cost and size of the product I use either Fedex or EMS. EMS is more cost effective but takes longer. I've never had a problem with either.
Quick job boring out a pair of wheel spacers. https://scontent.fpos3-1.fna.fbcdn.net/v/t1.0-9/p960x960/105586583_1660375734127588_8012838352233703110_o.jpg?_nc_cat=110&_nc_sid=8024bb&_nc_ohc=JYEtMM_HRNQAX-7XnZi&_nc_ht=scontent.fpos3-1.fna&_nc_tp=6&oh=f0577f1d1dc18e989bf384eea49d8...
Tooled up to cut some gears! Though I'd share a few pictures of the process. Arbor and Gear Blanks made on the lathe. One will be 44T and the other 33T, Module 1.25. https://live.staticflickr.com/65535/49915654413_5e108b7606_k.jpg 44T bank mounted on arbor and setup on the milling machine https://l...
These drivers really fcking dotish out here yes and them men driving container truck and thing eh. Brother man still saying how the only way he going to believe 70% hand sanitizer works is if they take it and put it in a lab and prove it kills this specific strain. He also says he knows hand saniti...
Could anyone recommend me a kit online that contains all the parts (belts, water pump, tensioners, etc) needed/recommended for a timing belt change for a local 1.5L 2011 Impreza (GE3, EL15 engine).
Made an outboard Spider for my lathe. This allows you to support/center up long pieces of stock when you pass it through the headstock. The main body was made from 4140 steel. There is also a 10mm pocket in the body that holds a magnet that the tachometer's sensor will pickup. These parts were not m...
Looking good man.... bringing back some memories of us setting up that 2 Ton machine.... LOL Thanks man...I don't think anyone involved would ever forget that day, wrestling that machine into place LOL!! Car nice 2x72 grinder man! I've been meaning to build one myself (for years LOL) but haven't go...
I ordered my machines with 3PH motors and did the VDF wiring myself. These are the control panels I made for each machine. PM1340GT Lathe: Factory Control Panel on the left, my control panel on the right. https://farm5.staticflickr.com/4566/24545061718_d3c571ad21_h.jpg The legend plate sits on an Al...